Sony SDM-P234 Manuel d'utilisateur

© 2004 Sony CorporationTFT LCD ColorComputer DisplaySDM-P234

10If no picture appears on your screen• Check that the power cord and the video signal cable are properly connected.• If “NO INPUT SIGNAL” appears on

11GBSelecting the input signal (INPUT)Touch INPUT.The input signal changes each time you touch this key.On-screen message (Appears about 5 seconds on

12Customizing Your MonitorYou can make numerous adjustments to your monitor using the on-screen menu.Navigating the menuYou can adjust the menus by us

13GB PICTURE ADJUST menuYou can adjust the following items using the PICTURE ADJUST menu.• MODE (ECO mode)• BACKLIGHT • CONTRAST 6• BRIGHTNESS • MODE

143Touch m/M to select “0 MODE RESET” and touch OK.The “RESET” menu appears on the screen.4 Touch m/M to select the desired mode and touch OK.•OK: To

15GB6Touch m/M to select “PHASE” and touch OK.The “PHASE” adjustment menu appears on the screen.7Touch m/M until the horizontal stripes are at a minim

164Touch m/M to select R (Red), G (Green) or B (Blue) and touch OK. Then touch m/M to adjust the GAIN and touch OK.5Touch m/M to select , then touch

17GB MENU POSITION menuYou can change the menu position if it is blocking an image on the screen.1Touch MENU.The main menu appears on the screen.2Touc

18 MENU LOCK menuLock the control of keys to prevent accidental adjustments or resetting.1 Touch MENU.The main menu appears on the screen.2Touch m/M t

19GBTechnical FeaturesPower saving functionThis monitor meets the power-saving guidelines set by VESA, ENERGY STAR, and NUTEK. If the monitor is conne

2Owner’s RecordThe model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them when

20Automatic picture quality adjustment function (analog RGB signal only)When the monitor receives an input signal, it automatically adjusts the pictur

21GBTroubleshootingBefore contacting technical support, refer to this section.On-screen messagesIf there is something wrong with the input signal, one

22Trouble symptoms and remediesIf a problem occurs as a result of a connected computer or other equipment, refer to the connected computer/equipment’s

23GBPicture flickers, bounces, oscillates, or is scrambled.• Adjust the pitch and phase (analog RGB signal only) (page 14).• Try plugging the monitor

24Displaying this monitor’s informationWhile the monitor is receiving a video signal, touch and hold MENU for more than 5 seconds until the informatio

25GBSpecificationsLCD panelPanel type: a-Si TFT Active MatrixPicture size:23 inch (58.4 cm)Input signal formatRGB operating frequency*Horizontal: 28–9

iiiTCO’99 Eco-documentx Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product d

3Table of ContentsGB• Macintosh is a trademark licensed to Apple Computer, Inc., registered in the U.S.A. and other countries.•Windows is registered

4PrecautionsWarning on power connectionsUse the supplied power cord. If you use a different power cord, be sure that it is compatible with your local

5GBIdentifying parts and controlsSee the pages in parentheses for further details.This display employs a touch sensor key system. You can operate the

6Rear of the LCD displayK AC IN connector (page 8)This connector connects the power cord (supplied).L Cable holder (page 9)This part secures cables an

7GBSetupBefore using your monitor, check that the following items are included in your carton:• LCD display• Power cord• HD15-HD15 video signal cable

8x Connecting to a MacintoshWhen connecting a Macintosh computer, use an adapter (not supplied), if necessary. Connect the adapter to the computer be

9GBSetup 5:Bundle the cords and cables1 Slide up the back cover.2 Remove the stand cover.3 Secure the video signal cables, audio cords and speaker cor