Sony STR-DA5700ES Manuel d'utilisateur Page 97
- Page / 150
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
97
GB
Adjusting Settings
•Small
If the sound is distorted, or you feel a lack
of surround effects when using multi-
channel surround sound, select “Small” to
activate the bass redirection circuitry and
output the bass frequencies of each
channel from the subwoofer or other
“Large” speakers.
Notes
• The surround back speakers will be set to the same
setting as that of the surround speakers.
• When the front speakers are set to “Small,” the
center, surround, surround back, and front high
speakers are also automatically set to “Small.”
• If you do not use the subwoofer, the front speakers
are automatically set to “Large.”
To adjust the crossover
frequency of each speaker
Lets you set the bass crossover frequency of
speakers that has been set to “Small” in the
Size menu. Measured speaker crossover
frequency is set for each speaker after “Auto
Calibration.”
1 Select “Crossover Frequency,” then
press .
2 Select the speaker on the screen for
which you want to adjust the crossover
frequency.
3 Set the crossover frequency of the
selected speaker.
Note
The surround back speakers will be set to the same
setting as that of the surround speakers.
To adjust the level of the rear
speakers
You can adjust the level of the rear speakers
(surround speakers and surround back
speaker(s)) in contrast to the level of the front
speakers all at one time.
1 Select “All Surround Level,” then press
.
2 Adjust the level of the rear speakers.
You can adjust the level from –5 dB to
+5 dB in 1 dB intervals.
Lets you select the test tone type on the Test
Tone screen.
To output a test tone from each
speaker
You can output a test tone from the speakers in
sequence.
1 Select “Test Tone,” then press .
The Test Tone screen appears.
2 Adjust the parameter, then press .
•Off
•Auto
The test tone is output from each speaker
in sequence.
• L, C, R, SR, SB*, SBR, SBL, SL, LH,
RH, SW
* “SB” appears when only one surround back
speaker is connected.
You can select which speakers will output
the test tone.
3 Adjust “Level,” then press .
To output a test tone from
adjacent speakers
You can output a test tone from adjacent
speakers so that you can adjust the balance
between the speakers.
1 Select “Phase Noise,” then press .
The Phase Noise screen appears.
2 Adjust the parameter, then press .
•Off
• L/R, L/C, C/R, R/SR, SR/SBR, SR/SB*,
SBR/SBL, SR/SL, SB/SL*, SBL/SL,
LH/RH, SL/L, L/SR, SL/R, L/RH, LH/R
*“SR/SB” and “SB/SL” appear when only one
surround back speaker is connected.
Test Tone
continued
- Multi Channel 1
- AV Receiver 1
- About This Manual 3
- On Copyrights 3
- Main features of the receiver 5
- Useful functions 6
- Table of Contents 7
- Using the Remote Control 8
- Front panel 9
- Indicators on the display 11
- Rear panel 14
- Multifunction remote control 16
- (RM-AAL038) 16
- Simple remote control 18
- (RM-AAU124) 18
- Getting Started 19
- Note on converting video 20
- To display Closed Caption 20
- To connect a recording 20
- 1: Installing speakers 22
- Recommended speaker 23
- Connecting speakers 24
- ZONE 2 connection 25
- 2: Connecting the monitor 26
- B Audio cord (not supplied) 27
- C Video cord (not supplied) 27
- E HDMI cable (not supplied) 27
- A HDMI cable (not supplied) 28
- Video/audio signals 30
- Audio signals Video signals 30
- C Audio cord (not supplied) 31
- D Video cord (not supplied) 31
- A Audio cord (not supplied) 34
- B Video cord (not supplied) 34
- B HDMI cable (not supplied) 35
- HDMI features 36
- CD or ordinary CDs 37
- CD player 38
- Super Audio CD player 38
- CD on a Super Audio CD player 39
- A USB cable (not supplied) 40
- AM loop antenna 42
- (aerial) (supplied) 42
- 5: Connecting to the 44
- Configuration example 45
- 6: Preparing the receiver 46
- 3 Release the TONE MODE and 47
- 7: Setting up the receiver 48
- SPEAKERS (A/B/A+B/OFF) 49
- 8: Setting up connected 50
- 9: Preparing a computer 50
- Guide to on-screen 51
- 2 Press HOME 51
- Overview of the main menus 52
- Enjoying images/sound 53
- System Requirements 54
- Playing back content on a 54
- (not supplied) 55
- Apple Composite AV Cable 55
- Registering your favorite 57
- Available options 58
- FM/AM screen 58
- Playing files on an 59
- Playing via a Network 60
- Programming FM/AM radio 62
- Tuning to preset stations 62
- Receiving RDS broadcasts 62
- Selecting the sound field 64
- About the effect type for HD 66
- Enjoying Sound Effects 67
- Sound Field Mode 68
- Notes on the sound fields 68
- Bass Treble 70
- Frequency 70
- What you can do with the 71
- Multi-zone function 71
- 2:Zone 3 connections 72
- Set the volume control for 73
- (ZONE 2/ZONE 3 operations) 74
- Using Multi-zone Features 75
- Using Other Features 76
- What is “BRAVIA” Sync? 76
- Preparing for the “BRAVIA” 76
- System Power-Off 77
- One-Touch Play 77
- System Audio Control 77
- Switching the monitors 78
- (Pass Through) 79
- INPUT MODE 80
- INPUT SELECTOR 80
- * factory default setting 82
- (Easy Automation) 83
- “AM” is selected for “Input.” 84
- Save the settings to a Scene 85
- Recording with a video 86
- Recording with an audio 87
- 2 Press AMP 88
- Using a bi-amplifier 89
- Using the setting menu 90
- 1 Select “Settings” from the 90
- Setting menu list 91
- Easy Setup 93
- Speaker Settings 93
- Automatic Phase Matching 95
- Speaker Relocation 95
- Speaker Connection 96
- Speaker Setup 96
- Test Tone 97
- Center Analog Down Mix 98
- Speaker Impedance 98
- Distance Unit 98
- Audio Settings 99
- Video Settings 101
- Zone Resolution 102
- Playback Resolution 103
- HDMI Settings 104
- H.A.T.S 105
- Control for HDMI 105
- Pass Through 105
- Input Settings 106
- Network Settings 107
- Internet Services 107
- Settings 107
- Zone Settings 108
- Zone Setup 109
- System Settings 110
- 1 Press ?/1 to turn off the 110
- Network Update 111
- Operating without using 111
- 1 Turn on the receiver 111
- 2 Press AMP MENU 111
- Press RETURN/EXIT O 112
- Adjusting Settings 113
- To change the display 118
- Operating each 119
- Turning off all connected 120
- Programming the remote 120
- 4 Press ENT/MEM 121
- To control an LD player 123
- To control a video CD player 123
- To control a VCR 123
- Performing several 124
- Program the sequence of the 125
- Starting macro play 125
- 1 Press FAVORITES while 126
- 2 Press the input button 126
- Clearing the memory of 127
- 2 Release all buttons 128
- Precautions 129
- Troubleshooting 130
- Receiver 135
- To ground 135
- Ground (earth) 135
- Outdoor FM antenna (aerial) 135
- PC (USB) 136
- USB device 136
- Internet video 138
- “BRAVIA” Sync (“Control for 138
- Remote control 139
- Error messages 140
- Additional Information 141
- Specifications 142
- Playable types of files 144
- Supplied accessories 145
Produits connexes et manuels pour Récepteurs AV Sony STR-DA5700ES
(127 pages)
(2 pages)
(150 pages)
(2 pages)
(56 pages)
(68 pages)
(56 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.730 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels