Sony CCD-CR1 Manuel d'utilisateur télécharger pdf (Page 24)

Editing onto another tape

You can save the recorded picture and create your own video program by editing with

any other 0 8 mm, HI0 Hi8, VMS. VHS, SVMS' S-VHS, iVtKH VHSC, SMKH S-VHSC, fD

Betamax VCR or IX’ DV that has video/audio inputs.

Before editing

Connect the camcorder to the VCR using the supplied A/V connecting cable.

Set the input selector on the VCR to LINE, if available.

If your VCR is a stereo type

Connect only the black plug for audio L (left) on the VCR. With this connection, the

sound is monaural even in stereo models

starting editing

Turn off the speaker of the camcorder while editing. Otherwise, picture distortion may

(.Kcur.

(1) Insert a blank tape (or a tape you want to record over) into the VCR.

(2) Play back the recorded video cartridge on the camcorder until you locate the

point just before where you want to start editing, then press II to set the

camcorder in playback pause mode.

(3) On the VCR, locate the recording start point and set the VCR in recording

pause mode.

(4) First press II on the camcorder, and after a few seconds press II on the VCR

when ycHi want to start editing.

To edit more scenes

Repeat stops 2 to 4.

To stop editing

Press ■ on both the camcc^rder and the VCR.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29

Pas de commentaire

Sony CCD-CR1 Manuel d'utilisateur Page 24