Sony DCR-TRV5 Manuel d'utilisateur télécharger pdf (Page 60)

Using the A/V connecting cable [a] or S video connecting cable

(not supplied) [b]

Set the input selector on the VCR to LINE.

Notes on editing when using the A/V connecting cable

• Press DATA CODE , SEARCH MODE, or DISPLAY to turn off the display indicators.

Otherwise, the indicators will be recorded on the tape.

• If your TV or VCR is a monaural type, connect the yellow plug of the A/V connecting

cable for video to the TV or VCR. Connect only the white or red plug for audio to the

TV or VCR. If you connect the white plug, the sound is L (left) signal. If you connect

the red plug, the sound is R (right) signal.

• You can edit precisely by connecting a LANC cable to this camcorder and other video

equipment having fine synchro-editing function, using this camcorder as a player.

Starting editing

(1)Insert a blank tape (or a tape you want to record over) into the VCR, and insert your

recorded tape into the camcorder.

(2)Play back the recorded tape on the camcorder until you locate the point where you

want to start editing, then press P to set the camcorder in playback pause mode.

(3)On the VCR, locate the recording start point and set the VCR in recording pause

mode.

(4)Press P on the camcorder and VCR simultaneously to start editing.

To edit more scenes

Repeat steps 2 to 4.

To stop editing

Press p on both the camcorder and the VCR.

Editing onto another tape

: Signal flow

S VIDEO

OUT

(not supplied)

AUDIO/VIDEO

OUT

S VIDEO

VIDEO

AUDIO

[a]

[b]

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 91 92

Pas de commentaire

Sony DCR-TRV5 Manuel d'utilisateur Page 60