Sony HDR-AX2000 Manuel d'utilisateur télécharger pdf (Page 19)

19

Getting Started

– The battery pack is too cold.

Remove the battery pack and put it in a warm

place.

– The battery pack is too hot.

Remove the battery pack and put it in a cool

place.

• The power will not be supplied from the battery

as long as the AC Adaptor is connected to the

DC IN jack of your camcorder, even when the

power cord (mains lead) is disconnected from

the wall outlet (wall socket).

On the charging time

• Time measured with the camcorder at 25 °C

(77 °F). 10 °C to 30 °C (50 °F to 86 °F) is

recommended.

Using an outside power source

You can use the AC Adaptor to obtain the

AC power. While you are using the AC

Adaptor, the battery pack will not lose its

charge even when it is attached to your

camcorder.

Connect your camcorder as shown

in “Step 3: Charging the battery

pack” on page 17.

On the AC Adaptor

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic

objects. This may cause a malfunction.

Step 4: Turning the

power on and holding

your camcorder

properly

To record or play back, set the POWER

switch to ON.

When you use your camcorder for the first

time, the [CLOCK SET] screen appears

(p. 22).

1 Slide the POWER switch to ON

while pressing the green button.

b Notes

• The current date and time appear on the LCD

screen for a few seconds when you turn on your

camcorder after you set the date and time with

[CLOCK SET] (p. 22).

POWER switch

Press and hold the

green button.

Continued ,

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 131 132

Commentaires sur ces manuels

Pas de commentaire