Sony NEX-C3 Manuel d'utilisateur télécharger pdf (Page 167)

GB

75

Others

On using the lenses and

accessories

It is recommended that you use Sony

lenses/accessories designed to suit

the characteristics of this camera.

Using the products of other

manufacturers may cause the camera

not to operate to its capability, or

result in accidents and malfunctions

of the camera.

On the Smart Accessory

Terminal

Set the power switch of the camera

to OFF before you attach or remove

an accessory, such as the flash, to the

Smart Accessory Terminal. When

attaching an accessory, plug the

accessory into the Smart Accessory

Terminal to the end and fasten the

screw. Make sure that the accessory

is attached to the camera securely.

Do not use/store the

camera in the following

places

• In an extremely hot, dry or humid

place

In places such as in a car parked in

the sun, the camera body may

become deformed and this may

cause a malfunction.

• Storing under direct sunlight or

near a heater

The camera body may become

discolored or deformed, and this

may cause a malfunction.

• In a location subject to rocking

vibration

• Near strong magnetic place

• In sandy or dusty places

Be careful not to let sand or dust

get into the camera. This may

cause the camera to malfunction,

and in some cases this malfunction

cannot be repaired.

On the grip

The grip is applied with a special

coating. It may be discolored if it is

rubbed with dark colored cloth,

leather, etc.

On storing

Be sure to attach the front lens cap

when not using the camera.

On the temperature of the

camera

When you continue to use the

camera for a long time, the camera

or the battery pack may become hot.

This is not a malfunction.

On operating temperatures

Your camera is designed for use

under the temperatures between 0°C

and 40°C (32°F and 104°F).

Shooting in extremely cold or hot

places that exceed this range is not

recommended.

On moisture condensation

If the camera is brought directly

from a cold to a warm location,

moisture may condense inside or

outside the camera. This moisture

condensation may cause a

malfunction of the camera.

How to prevent moisture

condensation

When bringing the camera from a

cold place to a warm place, seal the

camera in a plastic bag and allow it

to adapt to conditions at the new

location over about an hour.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 176 177

Commentaires sur ces manuels

Pas de commentaire