Sony CDX-GT550UI Manuel d'utilisateur télécharger pdf (Page 19)

19

DM+ Advanced

DM+ Advanced improves digitally compressed

sound by restoring high frequencies lost in the

compression process.

1 During playback, press the select

button.

2 Rotate the control dial until “DM+”

appears, then press it.

3 Rotate the control dial to select “ON,”

then press it.

4 Press (BACK).

The display returns to normal play mode.

Tip

The DM+ setting can be memorized for each source.

Using rear speakers as subwoofer

— Rear Bass Enhancer

Rear Bass Enhancer enhances the bass sound by

applying the low pass filter setting (page 20) to

the rear speakers. This function allows the rear

speakers to work as a subwoofer if one is not

connected.

1 During reception/playback, press the

select button.

2 Rotate the control dial until “RB ENH”

appears, then press it.

3 Rotate the control dial to select from

“1,” “2” or “3,” then press it.

4 Press (BACK).

The display returns to normal reception/play

mode.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Rotate the control dial until the

desired item appears, then press it.

3 Rotate the control dial to select the

setting, then press it.*

The setting is complete.

4 Press (BACK).

The display returns to normal reception/play

mode.

* For CLOCK-ADJ and BTM settings, step 4 is not

necessary.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

CLOCK-ADJ (Clock Adjust) (page 6)

CT (Clock Time)

Activates the CT function: “ON,” “OFF”

(page 10, 11).

BEEP

Activates the beep sound: “ON,” “OFF.”

AUX-A*

1

(AUX Audio)

Activates the AUX source display: “ON,”

“OFF” (page 20).

AUTO OFF

Shuts off automatically after a desired time

when the unit is turned off: “NO,” “30S

(Seconds),” “30M (Minutes),” “60M (Minutes).”

REAR/SUB*

1

Switches the audio output: “SUB-OUT”

(subwoofer), “REAR-OUT” (power amplifier).

DEMO

(Demonstration)

Activates the demonstration: “ON,” “OFF.”

DIMMER

Changes the display brightness: “ON,” “OFF.”

ILLUM (Illumination)

Changes the illumination color: “1,” “2.”

M.DISPLAY (Motion Display)

– “SA”: to show moving patterns and spectrum

analyzer.

– “OFF”: to deactivate the Motion Display.

AUTO SCR (Auto Scroll)

Scrolls long items automatically: “ON,” “OFF.”

continue to next page t

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 139 140

Commentaires sur ces manuels

Pas de commentaire