Sony CDX-GT740UI Manuel d'utilisateur télécharger pdf (Page 19)

19

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the control dial.

2 Rotate the control dial until the

desired menu item appears, then

press it.

Depending on the setting, by rotating the

control dial again, further parameters can be

set.

3 Rotate the control dial to select the

setting, then press it.

4 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

The following items can be set:

Customizing the equalizer curve

— EQ3 Parametric Tune

“Custom” of EQ3 Parametric Preset allows you

to make your own equalizer settings.

Select “Custom” of EQ3 Parametric Preset.

1 Select a source, then press and hold

the control dial.

2 Rotate the control dial to select “EQ3

Parametric Tune,” then press it.

3 Setting the equalizer curve.

You can adjust the equalizer center frequency,

volume level and bandwidth in each range

from “Low,” “Mid”, or “Hi.”

1 Rotate the control dial until the desired

menu item appears, then press it.

2 Rotate the control dial to select the

setting, then press it.

Selectable frequency in each range:

Low: 60 Hz or 100 Hz

Mid: 500 Hz or 1.0 kHz

Hi: 10.0 kHz or 12.5 kHz

Adjustable volume level: “+10 dB” –

“0 dB” – “–10 dB.”

EQ3 Parametric Preset

Selects an equalizer curve from 7 music types.

EQ3 Parametric Tune*

1

Custom equalizer settings.

Subwoofer Tune & LPF

Phase

Selects the phase (effective only when LPF is

on): “Normal,” “Reverse.”

FREQ

Selects the subwoofer cut-off frequency:

“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz,”

“OFF.”

Level

Adjusts the subwoofer volume: “+10dB” –

“0dB” – “–10dB.”

(“– ∞” is displayed at the lowest setting.)

HPF & Speaker Select

Speaker

Selects the Speaker: “All,” “Front”, or “Rear.”

FREQ

Selects the cut-off frequency: “OFF,” “80Hz,”

“100Hz,” “120Hz,” “140Hz,” “160Hz.”

DSO (Dynamic Soundstage Organizer)

Creates a more ambient sound field.

To select the DSO mode: “1,” “2,” “3,” or “off.”

The larger the number, the more enhanced the

effect.

Fader & Balance

Fader

Adjusts the relative level: “Front:15”– “Center”

– “Rear:15.”

Balance

Adjusts the sound balance: “Right:15”–

“Center” – “Left:15.”

AUX Level*

2

Adjusts the volume level for each connected

auxiliary equipment: “+18 dB” – “0 dB” – “–8

dB.”

This setting negates the need to adjust the

volume level between sources.

*1 Hidden when EQ3 Parametric Preset is set to “off.”

*2 When AUX source is activated.

continue to next page t

60Hz

MID HI

100Hz 500Hz 1.0kHz 10.0kHz 12.5kHz

LOW

-

10dB

+10dB

0dB

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 139 140

Commentaires sur ces manuels

Pas de commentaire