Sony PCV-J100 Manuel d'utilisateur télécharger pdf (Page 27)

Enabling Ethernet

2 Click the System icon.

The System Properties window appears.

3 Click the Device Manager tab.

4 Click Sony i.LINK(1394) Adapter.

The Sony i.LINK(1394) Adapter window appears.

5 Click the Enable Device button.

6 Click OK.

The Sony i.LINK(1394) Adapter icon should no longer have an “X” on it.

This means Smart Connect is now enabled.

7 Close all windows and restart your computer in order for the new settings to

take effect.

Now your Smart Connect software is ready to use.

Enabling Ethernet

Your computer comes with a preinstalled Ethernet interface. To enable faster

startup, your computer ships with this function disabled. You may, however,

enable Ethernet connectivity by following the instructions below.

To enable the Ethernet connection:

1 Right-click My Computer on the desktop and select Properties.

2 Click the Device Manager tab.

3 Select “Realtek RTL8139 (A/B/C/8130) PCI Fast Ethernet NIC” under the

Network Adapters category.

4 Click Properties.

5 Click Enable Device and then click OK.

6 Click Close.

When you use Smart Connect to connect two VAIO computers, you must assign

each computer a unique name by which it can be identified when the two computers

are networked. See the Smart Connect online Help for more information.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

Pas de commentaire

Sony PCV-J100 Manuel d'utilisateur Page 27