Sony RDR-GX300 Instructions d'exploitation télécharger pdf (Page 98)

If the equipment is connected to the DV IN jack,

(this is usually for a digital video camera

connection), select “DV” in the front panel

display by pressing PROG +/– or INPUT

SELECT.

, When an S video cable is connected to the

recorder’s LINE 4 IN jack, set “Line4 Input” in

Video Setup to “S Video” (page 89).

The playback picture or TV programme from

the equipment connected through the recorder

is distorted.

, If the playback picture output from a DVD

player, VCR, or tuner goes through your recorder

before reaching your TV, the copy-protection

signal applied to some programmes could affect

picture quality. Disconnect the playback

equipment in question and connect it directly to

your TV.

The picture does not fill the screen.

, Set “TV Type” in Video Setup in accordance

with the aspect ratio of your TV (page 87).

The picture does not fill the screen, even

though the aspect ratio is set in “TV Type” in

Video Setup.

, The aspect ratio of the disc is fixed on your DVD.

The picture is black and white.

, Check that “Line1 Output” of “Scart Setting” in

Video Setup is set to the appropriate item that

conforms to your system (page 88).

, If you are using a SCART cord, be sure to use

one that is fully wired (21 pins).

Sound

There is no sound.

, Re-connect all connections securely.

, The connecting cord is damaged.

, The input source setting on the amplifier or the

connection to the amplifier is incorrect.

, The recorder is in reverse play, fast-forward,

slow motion, or pause mode.

, If the audio signal does not come through the

DIGITAL OUT (OPTICAL or COAXIAL)

jacks, check the Audio Setup settings (page 89).

Sound distortion occurs.

, Set “Audio ATT” in Audio Setup to “On”

(page 89).

Sound is noisy.

, When playing a CD with DTS sound tracks,

noise will come from the LINE 2 OUT AUDIO

L/R jacks, LINE 1-TV jack, or LINE 3/

DECODER jack (page 56).

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“Audio DRC” in Audio Setup to “TV Mode”

(page 90).

, Set “Audio ATT” in Audio Setup to “Off”

(page 89).

An alternate audio track cannot be recorded or

played.

, When recording from connected equipment, set

“Line Audio Input” in TOOLS menu to

“Bilingual” (page 51).

, Multilingual tracks (main and sub) cannot be

recorded on DVD+RWs, DVD-RWs (Video

mode), DVD+Rs, or DVD-Rs. To record the

language, select “Main” or “Sub” of “DVD

Bilingual Rec.” in Options Setup before

recording (page 95). To record both the main and

sub sounds, record on a DVD-RW (VR mode).

, If you have connected an AV amplifier to the

DIGITAL OUT (OPTICAL or COAXIAL) jack

and want to change the audio track for a DVD-

RW (VR mode) during playback, set “Dolby

Digital” in Audio Setup to “D-PCM” (page 90).

Playback

The disc does not play.

, The disc is upside down. Insert the disc with the

labelled side facing up.

, The disc is not correctly inserted.

, Moisture has condensed inside the recorder.

Remove the disc and leave the recorder turned on

for about half an hour until the moisture

evaporates.

, If the disc was recorded on another recorder, the

recorder cannot play the disc if it was not

finalized (page 37).

The disc does not start playback from the

beginning.

, Resume play was activated (page 52).

, You have inserted a disc whose Title menu or

DVD menu automatically appears on the TV

screen when it is first inserted. Use the menu to

start playback.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 115 116

Commentaires sur ces manuels

Pas de commentaire

Sony RDR-GX300 Instructions d'exploitation Page 98

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Sony RDR-GX300