Sony BDV-N5200W Instructions d'exploitation télécharger pdf (Page 46)

46

US

BDV-N9200W/BDV-N7200W/BDV-N5200W

4-485-799-12(1)

D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200

(PMRF 01)\4485799121_US (U2)\080OTH.fm

masterpage: Left

Calibrating the

Appropriate Speaker

Settings Automatically

[Auto Calibration]

(BDV-N9200W/BDV-N7200W

only)

D.C.A.C. DX (Digital Cinema Auto

Calibration DX) brings you the ideal

sound experience by automatically

adjusting the setting of the speakers’

distance, location, and acoustic.

• The system outputs a loud test sound

when [Auto Calibration] starts. You

cannot turn the volume down. Give

consideration to children and neighbors.

• Before [Auto Calibration], make sure that

– all the speakers are connected to the

main unit and surround amplifier.

– the surround amplifier is turned on and

you have installed the surround

amplifier in an appropriate location to

ensure wireless connection with it.

1 Press HOME.

The home menu appears on the TV

screen.

2 Press B/b to select [Setup].

3 Press V/v to select [Audio

Settings], then press .

4 Press V/v to select [Auto

Calibration], then press .

The [Select speaker layout.] display

appears.

5 Press V/v to select setting

according to your speakers

placement, then press .

• [Standard]: The surround

speakers are installed in the rear

position.

• [All Front]: All speakers are

installed in the front position.

The confirmation display for [Auto

Calibration] appears.

6 Connect the calibration mic to the

A.CAL MIC jack on the rear panel.

Set up the calibration mic at ear

level using a tripod, etc. (not

supplied). The calibration mic

should aim the TV screen. The front

of each speaker should face the

calibration mic, and there should be

no obstruction between the

speakers and the calibration mic.

7 Press V/v to select [OK].

To cancel, select [Cancel].

8 Press .

[Auto Calibration] starts.

The system adjusts the speaker

settings automatically.

Be quiet during the measurement.

While [Auto Calibration] is in progress,

do not operate the system.

9 Confirm the result of [Auto

Calibration].

The distance and level for each

speaker appear on the TV screen.

• If measurement fails, follow the

message then retry [Auto

Calibration].

• If no center speaker is detected, the

[Center Speaker] will be

automatically set to [Off].

Note

Note

Note

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Commentaires sur ces manuels

Pas de commentaire