Sony BDV-N9200W Instructions d'exploitation télécharger pdf (Page 58)

58

GB

BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W

4-485-800-11(1)

D:\NORM'S JOB\SONY HA\SO130046\BDV-

N9200_7200_5200\4485800111_GB (CEK)\090SET.fm

masterpage: Left

x [SBM] (Super Bit Mapping)

[On]: Smooths the gradation of video

signals output from the HDMI (OUT)

jack.

[Off]: Select this when outputting

distorted video signals or unnatural

color.

x [IP Content NR Pro]

[Video3]/[Video2]/[Video1]/

[Film1]/[Film2]

/[Film3]: Adjusts the

video quality for Internet content. This

setting is same as the setting in option

menu when using the Internet service.

[Off]: Off.

x [Pause Mode]

[Auto]: Normally select this. The picture,

including subjects that move

dynamically, is output with no jitter.

[Frame]: The picture, including subjects

that do not move dynamically, is output

in high resolution.

[Audio Settings]

x [BD Audio MIX Setting]

[On]

: Outputs the audio obtained by

mixing the interactive audio and

secondary audio to the primary audio

during BDMV playback.

[Off]: Outputs the primary audio only.

x [Audio DRC]

You can compress the dynamic range of

the sound track.

[Auto]: Performs playback at the

dynamic range specified by the disc

(BD-ROM only).

[On]: The system reproduces the sound

track with the kind of dynamic range

that the recording engineer intended.

[Off]: No compression of dynamic

range.

x [Attenuation settings - AUDIO]

Distortion may occur when you listen to

an equipment connected to the AUDIO

IN (L/R) jacks. You can prevent

distortion by attenuating the input level

on the main unit.

[On]: Attenuates the input level. The

output level will decrease at this setting.

[Off]: Normal input level.

x [Audio Output]

You can select the output method

where the audio signal is output.

[Speaker]: Outputs multi-channel sound

from the system’s speakers only.

[Speaker + HDMI]: Outputs

multi-channel sound from the system’s

speakers and 2-channel linear PCM

signals from the HDMI (OUT) jack.

[HDMI]: Outputs sound from the HDMI

(OUT) jack only. Sound format depends

on the connected equipment.

• When [Control for HDMI] is set to [On]

(page 60), [Audio Output] is set to

[Speaker + HDMI] automatically and this

setting cannot be changed.

• Audio signals are not output from the

HDMI (OUT) jack when [Audio Output] is

set to [Speaker + HDMI] and [HDMI1 Audio

Input Mode] (page 61) is set to [TV].

(Europe models only)

Note

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 83 84

Commentaires sur ces manuels

Pas de commentaire