Sony BRAVIA KDL-26L5000 Manuel d'utilisateur télécharger pdf (Page 9)

Getting Started

Connecting the TV

Cable System or VHF/UHF Antenna System

You can enjoy high-definition and standard-definition digital programming (if available in your

area) along with standard-definition analog programming.

This TV is capable of receiving unscrambled digital programming for both cable (QAM and

8VSB) and external VHF/UHF antenna (ATSC).

Cable or VHF/UHF (or VHF only)

Cable System and VHF/UHF Antenna System

Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air antenna

programming, as indicated below.

75-ohm coaxial cable Rear of TV

CABLE/ANTENNA

• It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm

coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can easily be affected

by radio frequency interference, resulting in signal degradation.

Cable

Antenna

A/B RF Switch

Rear of TV

CABLE/ANTENNA

• Be sure to set the Signal Type setting to Cable or Antenna found under the Channel settings

for your input signal (see page 30).

(Continued)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Pas de commentaire

Sony BRAVIA KDL-26L5000 Manuel d'utilisateur Page 9