Sony STR-DA1800ES Manuel d'utilisateur télécharger pdf (Page 124)

124

US

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF

02\4428194122_USFR\US07ADD_STR-DA1800ES-CEL.fm

masterpage: Left

STR-DA1800ES

4-428-194-12(2)

The left and right sounds are

unbalanced or reversed.

• Check that the speakers and equipment are

connected correctly and securely.

• Adjust the sound level parameters using

the Speaker Settings menu.

Dolby Digital or DTS multi channel

sound is not reproduced.

• Check that the DVD, etc. you are playing

is recorded in Dolby Digital or DTS

format.

• When connecting the DVD player, etc., to

the digital input jacks of this receiver,

make sure the digital audio output setting

of the connected equipment is available.

• Set “Audio Out” to “AMP” in the HDMI

Settings menu (page 103).

• You can enjoy High Bitrate Audio (DTS-

HD Master Audio, Dolby TrueHD), Multi

Channel Linear PCM only with an HDMI

connection.

The surround effect cannot be

obtained.

• Make sure you have selected the sound

field for movie or music (page 66, 67).

• Sound fields do not function when

DTS-HD Master Audio, DTS-HD High

Resolution Audio or Dolby TrueHD with

sampling frequency of more than 48 kHz

are being received.

Recording cannot be carried out.

• Check that the equipment is connected

correctly.

• Select the source equipment using the

input buttons (page 54).

• Audio input signals via HDMI IN and

DIGITAL IN jacks cannot be recorded.

• Copyright protection to prevent recording

is contained in the sources. In this case,

you may not be able to record from the

sources.

A test tone is not output from the

speakers

• The speaker cords may not be connected

securely. Check to see if they are

connected securely and cannot be

disconnected by pulling on them slightly.

• The speaker cords may have short-circuit

problem.

• Make sure that you are not using PARTY

STREAMING function (page 78).

A test tone is output from a different

speaker than the speaker displayed on

the TV screen

• The speaker pattern set up is incorrect.

Make sure that the speaker connections

and the speaker pattern match correctly.

When the receiver is in standby mode,

there is no sound output from the TV.

• When the receiver enters into standby

mode, sound is from the last HDMI

equipment selection before you turned off

the receiver. If you are enjoying other

equipment, play the equipment and

perform the One-Touch Play operation, or

turn on the receiver to select the HDMI

equipment you want to enjoy.

• Make sure “Pass Through” is set to “ON”

in the HDMI Settings menu if you connect

equipment not compatible with the

“BRAVIA” Sync to the receiver

(page 103).

There is a time gap between the audio

output and visual display.

• Check that the PARTY STREAMING

function is not being used. To close a

PARTY, press SHIFT, then hold down

PARTY until “CLOSE PARTY” appears.

For details, see page 78.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 287 288

Commentaires sur ces manuels

Pas de commentaire