Sony HVR-M15N Manuel d'utilisateur télécharger pdf (Page 48)

Chapter 4 Adjusting and Setting Through Menus

48 Chapter 4 Adjusting and Setting Through Menus

Icon/Menu Submenu Setting

IN/OUT REC

COLOR BAR

BARS TYPE

DV BARS

EE/PB SEL

480i LEVEL

Selects whether to display color bars or not. Also, you may select color bars with or without

tone signals (1 kHz full bit –20 dB at 60i, 1 kHz full bit –18 dB at 50i).

OFF : Does not display color bars and no tone signals.

ON : Displays color bars without tone signals.

ON [TONE] : Displays color bars with tone signals.

Notes

• Color bars and tone signals are output from HDV/DV jack and analog output jacks.

• Color bars and tone signals cannot be output when the tape is in playback mode.

• The color bars output to i.LINK/the color bars recorded on tone signals and tapes/the

format of tone signals can be set by [HDV/DV SEL] and [

REC MODE].

– When [HDV/DV SEL] is set to [AUTO], the format of the color bar and tone signals will

be output/recorded according to the video format displayed in “1 Format indicator”

(page 18)

of text data display on a monitor.

– When [HDV/DV SEL] is set to [HDV], color bars and tone signals are output/recorded in

HDV format.

– When [HDV/DV SEL] is set to [DV] and [ REC MODE] is set to [DVCAM], color bars

and tone signals will be output/recorded in DVCAM format.

– When [HDV/DV SEL] is set to [DV] and [ REC MODE] is set to [DV SP], color bars

will be output/recorded in DV (SP) format.

• When the unit turns off and on again, [COLOR BAR] is automatically set to [OFF].

Selects the type of color bars.

TYPE 1 : Outputs TYPE 1 color bars.

TYPE 2 : Outputs TYPE 2 color bars.

TYPE 3 : Outputs TYPE 3 color bars.

Notes

• When color bars are output in NTSC (60i) mode on the unit, no-setup (0 IRE) signals are

output.

• Even when the unit’s screen aspect ratio displays 4:3, the color bars are generated as

16:9. To output the edge crop (4:3) in HDV format, select [TYPE 1].

• Color bars on the unit are generated in HDV (1080i) resolution. When a resolution other

than HDV (1080i) is output, the color bars are down converted and output. The transition

edges between the color bars are distorted.

• You cannot change the current setting during recording.

Selects the aspect ratio of color bars set in [BARS TYPE] (DVCAM/DV (SP) format only).

16:9 : Sets the aspect ratio of color bars to 16:9.

4:3 : Sets the aspect ratio of color bars to 4:3.

Note

You cannot change the current setting during recording.

Sets the stop, fast-forward and rewind modes.

EE : Outputs EE pictures and EE sounds.

PB: Mutes the image and sound.

Note

Even [PB] is selected, when you press REC button:

– EE pictures and EE sounds are output.

– When [HDV/DV IN TC] in [TC/UB SET] menu is set to [EXTERNAL], and INPUT

SELECT switch is set to HDV/DV, the time code of the other device connected to

HDV/DV jack is displayed on Data display screen.

Selects the component output level of luminance and chrominance from either BETACAM

or SMPTE signals when the component output is 480i.

SMPTE : Sets COMPONENT OUT jacks to SMPTE level.

BETACAM : Sets COMPONENT OUT jacks to BETACAM level.

Note

For details on COMPONENT OUT jacks specifications,

see page 75.

Operating the Menus

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Sony HVR-M15N Manuel d'utilisateur Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de cassettes Sony HVR-M15N