Sony PCV-R553DS Manuel d'utilisateur télécharger pdf (Page 47)

Removing, Installing, and Replacing Components

If necessary, remove any add-in cards (see “Removing an Add-in

Card” on page 30) to gain access to the battery. You may also need to

disconnect some cables.

Use a small flathead screwdriver or your finger to push out against

the small tab at one end of the battery holder to pop out the battery.

Gently lift out the battery and dispose of it according to the

instructions that came with the new battery.

Insert the new battery into the battery holder with the plus (+) side

up.

Push down on the battery with your finger until it snaps into

position.

Replace any add-in cards that were removed.

Reconnect any cables that were disconnected.

Replace the cover (see “Replacing the Cover” on page 27).

Reconnect the power cord and turn on the computer.

Touch any exposed metal part of chassis to discharge static electricity in

your body before handling an add-in card or other sensitive electronic

component.

✍

The Sony CR2032 battery is recommended. Using a type of battery other than a

CR2032 may present a risk of fire or explosion.

KY0072.VSD

Push in here to

pop out battery

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 121 122

Pas de commentaire

Sony PCV-R553DS Manuel d'utilisateur Page 47