Sony PCV-RX270DS Manuel d'utilisateur télécharger pdf (Page 45)

Removing, Installing, and Replacing Components

Align the module over the appropriate socket, noting the location of

pin 1 on the module and pin 1 on the socket.

Carefully but firmly insert the edge of the module into the socket.

Press down firmly and evenly at both corners until the module is

fully seated.

Replace the power supply (see “Replacing the Power Supply” on

page 42).

Replace the side cover (see “Replacing the Side Cover” on page 23).

✍

When the module is fully seated, the handles on each side are straight up and

locked into the slot on each side of the module. If the handles are not totally

straight upright, continue to press down on each side of the module until the

handles lock into place.

DIMM1

DIMM2

Pin 1 side

Indicates pin 1

Memory module (DIMM)

OM04586.VSD

Handles

Press down

here

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 117 118

Pas de commentaire

Sony PCV-RX270DS Manuel d'utilisateur Page 45