Sony PCV-RX640 Manuel d'utilisateur télécharger pdf (Page 54)

VAIO Digital Studio System Reference Manual

Installing a 3.5-inch Internal Hard Disk Drive

Your system comes with an available bay to hold an additional 3.5-inch

hard disk drive. The drive you install must not require front panel access.

The hard disk drive access light blinks when either internal drive is

active.

1 Configure the jumpers on the new drive as a slave device (see your

drive’s documentation for configuration instructions).

2 Remove the side cover (see “Removing the Side Cover” on page 24).

✍ Some models, such as Configure-to-Order (CTO) systems, may already have a

second hard disk drive installed.

! Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut

down the computer, and unplug the power cord.

Power connector

Jumpers

Drive connector

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 91 92

Pas de commentaire

Sony PCV-RX640 Manuel d'utilisateur Page 54