Sony DMX-WL1 Manuel d'utilisateur télécharger pdf (Page 9)

9

4 Verify the Wireless LINK LEVEL.

The LINK LEVEL LEDs located on the front

of the transmitter unit allows you to verify

the Wireless LINK LEVEL between the

transmitter and the receiver units.

LINK LEVEL LED

LINK LEVEL

When the units are establishing a link, the

LINK LEVEL LED blinks.

After the wireless connection is established,

the LED stops blinking.

To ensure good picture quality, make

sure that all three LEDs light up in green,

indicating a good link.

Recommended placement of the receiver

and transmitter units is within 65 feet (20 m)

of each other. If you experience problems

with the LINK LEVEL, removing obstructions

from the path between the units may improve

the LINK LEVEL.

If the Wireless LINK LEVEL is less than three

or the picture is noisy or the sound quality

is diminished, press CONNECT to switch to

another wireless channel.

If you experience problems ﬁnding a suitable

LINK LEVEL, see the Troubleshooting

section in the Reference Guide for more

information.

Optimal environment for placement

of the units

Follow the suggestions below to create an

optimal environment for your Wireless Link.

Proper placement of the receiver and transmitter

units will ensure a strong Wireless LINK LEVEL

for superior performance.

• Use one system per room, placing the

transmitter and receiver units for each system

in the same room.

• If you use a 5 GHz WLAN or cordless phone,

place those in a different room.

• Do not place either unit on a metallic rack.

• Place the transmitter unit as high up as

possible.

• Maximum operating distance is approximately

65 feet (20 m), depending on the environment.

• Be sure to keep at least 1 foot (30 cm)

minimum distance between the transmitter and

receiver units.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire