Sony DVP-NS15 Manuel d'utilisateur télécharger pdf (Page 58)

58

Additional Information

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

Power

The power is not turned on.

, Check that the mains lead is connected

securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cord securely.

, The connecting cords are damaged.

, Check the connection to your TV (page 14)

and switch the input selector on your TV so

that the signal from the player appears on

the TV screen.

, Set “LINE” in “SCREEN SETUP” to an

item appropriate for your system (page 54).

, The disc is dirty or flawed.

, If the picture output from your player goes

through your VCR to get to your TV or if

you are connected to a combination TV/

VIDEO player, the copy-protection signal

applied to some DVD programmes could

affect picture quality.

, The disc is recorded in a colour system that

is different from your TV.

The picture does not fill the screen, even

though the aspect ratio is set in “TV TYPE”

under “SCREEN SETUP.”

, The aspect ratio of the disc is fixed on your

DVD.

The picture is black and white.

, Set “LINE” in “SCREEN SETUP” to an

item appropriate for your TV (page 54).

, Depending on the TV, the picture on the

screen becomes black and white when you

play a disc recorded in the NTSC colour

system.

, When you are using a SCART cord, be sure

to use one that is fully wired (21-pins).

Sound

There is no sound.

, Re-connect the connecting cord securely.

, The connecting cord is damaged.

, The player is connected to the wrong input

jack on the amplifier (receiver) (page 16).

, The amplifier (receiver) input is not

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (COAXIAL) jack,

check the audio settings (page 56).

, While playing a Super VCD on which the

audio track 2 is not recorded, no sound will

come out when you select “2:STEREO,”

“2:1/L,” or “2:2/R.”

, When playing multichannel MPEG audio

soundtracks, only the Front (L) and Front

(R) signal will be output from your two

front speakers.

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“AUDIO DRC” in “AUDIO SETUP” to

“TV MODE” (page 56).

Operation

The remote does not function.

, The batteries in the remote are weak.

, There are obstacles between the remote and

the player.

, The distance between the remote and the

player is too far.

, The remote is not pointed at the remote

sensor on the player.

The disc does not play.

, The disc is turned over.

Insert the disc with the playback side facing

down.

, The disc is skewed.

, The player cannot play certain discs

(page 6).

, The region code on the DVD does not match

the player.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Commentaires sur ces manuels

Pas de commentaire