Sony RDR-GX310 Instructions d'exploitation Page 49

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 100
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 48
49
Playback
To resume normal playback, press H.
b Notes
To enjoy the TVS function, set “Digital Out” to “On”
and “Dolby Digital” to “D-PCM” and “MPEG” to
“PCM” in “Audio” setup.
The volume may be reduced when surround effects are
set.
When the playback signal does not contain a signal for
the rear speakers, the surround effects will be difficult
to hear.
In addition, the surround effects may also be difficult to
hear depending on the title being played and the
environment where the recorder is being used.
When you select one of the surround modes, turn off
the surround settings of the connected TV or amplifier
(receiver).
Make sure that your listening position is between and
at an equal distance from your speakers, and that the
speakers are located in similar surroundings.
Angles and subtitles cannot be changed with titles
recorded on this recorder.
When you use the DIGITAL OUT (COAXIAL or
OPTICAL) jack to listen to MPEG audio signals and
set “MPEG” to “MPEG” in “Audio” setup, no sound
will come from your speakers if you select one of the
TVS modes.
96 kHz PCM audio and DTS audio do not have
surround effects.
Notes on playing DTS sound tracks on a CD
When playing DTS-encoded CDs, excessive noise will
be heard from the analogue stereo jacks. To avoid
possible damage to the audio system, the consumer
should take proper precautions when the analogue
stereo jacks of the recorder are connected to an
amplification system. To enjoy DTS Digital
Surround™ playback, an external 5.1-channel decoder
system must be connected to the digital jack of the
recorder.
Set the sound to “Stereo” using the (audio)
button when you play DTS sound tracks on a CD
(page 48).
Notes on playing DVDs with a DTS sound track
DTS audio signals are output only through the DIGITAL
OUT (COAXIAL or OPTICAL) jack.
When you play a DVD with DTS sound tracks, set
“DTS” to “On” in “Audio” setup (page 75).
(slow, freeze frame)
* Playback direction only
Plays in slow motion when pressed for more than one second in pause mode.
Plays one frame at a time when pressed briefly in pause mode.
X (pause) Pauses playback.
Buttons
Operations
-
RWVR
-
RW
Video
-
R
+
R
VCD
DVD
*
+
RW
,continued
Vue de la page 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 99 100

Commentaires sur ces manuels

Pas de commentaire