Sony MHC-RV55 Manuel d'utilisateur télécharger pdf (Page 39)

Troubleshooting

MP3 audio tracks take longer to play back than

others.

• After the system reads all tracks on the discs,

playback may take more time than usual if:

– the number of albums or tracks on the disc is

very large.

– the album and track organization structure is

very complex.

The album name, track title and ID3 tag and

the CD-TEXT characters do not appear

correctly.

• Use a disc that conforms with ISO9660 level 1,

level 2 or Joliet in the expansion format.

• The disc ID3 tag is not ver. 1.

• The characters that can be displayed by this unit

are as follows:

– Upper cases (A to Z)

– Numbers (0 to 9)

– Symbols (< > * + , – / [ ] \ _)

Other characters may not be displayed correctly.

Tuner

Severe hum or noise/stations cannot be

received. (“TUNED” or “STEREO” flashes in

the display.)

• Set the proper band and frequency (page 18).

• Connect the antenna properly (page 8).

• Find a place and an orientation that provide good

reception, then set up the antenna again. If you

cannot obtain good reception, we recommend you

connect a commercially available external

antenna.

• The supplied FM lead antenna receives signals

along its entire length, so make sure you extend it

fully.

• Locate the antennas as far away from the speaker

cords as possible.

• Try turning off surrounding electrical equipment.

• Set “CD POWER OFF” by CD power manage

function (page 19).

A stereo FM program cannot be received in

stereo.

• Press FM MODE repeatedly until “STEREO”

appears.

Tape deck

The tape does not record or play, or there is a

decrease in sound level.

• The heads are dirty. Clean them (page 42).

• The record/playback heads are magnetized.

Demagnetize them (page 42).

The tape does not erase completely.

• The record/playback heads are magnetized.

Demagnetize them (page 42).

There is excessive wow or flutter, or the sound

drops out.

• The capstans or pinch rollers are dirty. Clean them

(page 42).

Noise increases or the high frequencies are

erased.

• The record/playback heads are magnetized.

Demagnetize them (page 42).

The tape does not record.

• No cassette is loaded. Load a cassette.

• The tab has been removed from the cassette.

Cover the broken tab with adhesive tape

(page 42).

• The tape has wound to the end.

If the system still does not

operate properly after performing

the above measures, reset the

system as follows:

Use buttons on the unit for the operation.

1 Disconnect the power cord.

2 Reconnect the power cord.

3 Press x, PLAY MODE/TUNING MODE and

DISC 1 at the same time.

4 Press ?/1 to turn on the system.

The system is reset to the factory settings. You

should set the settings you made, such as the

preset stations, clock, and timer.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Sony MHC-RV55 Manuel d'utilisateur Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Appareils audio à domicile Sony MHC-RV55