Sony BDV-N8100W Manuel d'utilisateur télécharger pdf (Page 62)

62

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Left

x [Attenuate - AUDIO]

Distortion may occur when you listen to an

equipment connected to the AUDIO

(AUDIO IN L/R) jacks. You can prevent

distortion by attenuating the input level on

the main unit.

[On]

: Attenuates the input level. The output

level will decrease at this setting.

[Off]: Normal input level.

x [Audio Output]

You can select the output method where the

audio signal is output.

[Speaker]: Outputs multi-channel sound

from the system’s speakers only.

[Speaker + HDMI]

: Outputs multi-channel

sound from the system’s speakers and

2-channel linear PCM signals from the

HDMI (OUT) jack.

[HDMI]: Outputs sound from the HDMI

(OUT) jack only. Sound format depends on

the connected equipment.

• When [Control for HDMI] is set to [On]

(page 64), [Audio Output] is set to [Speaker +

HDMI] automatically and this setting cannot be

changed.

• When [Audio Output] is set to [HDMI], the

output signal format for the “TV” function is

2-channel linear PCM.

x [Sound Effect]

You can turn on or off the system’s sound

effects (SOUND MODE setting

(page 33)).

For a 2-channel source, you can select

[Dolby Pro Logic], [DTS Neo:6 Cinema],

or [DTS Neo:6 Music] to simulate surround

sound.

[Sound Mode On]

: Enables the surround

effect of the sound mode

(page 33) and

Football mode (page 34).

[Dolby Pro Logic]: The system simulates

surround sound from 2-channel sources

and outputs sound from all speakers

(5.1 channel) (Dolby Pro Logic decoding).

[DTS Neo:6 Cinema]/[DTS Neo:6 Music]:

The system simulates surround sound from

2-channel sources and produces multi-

channel sound (DTS Neo:6 Cinema/DTS

Neo:6 Music mode decoding).

[2ch Stereo]: This system outputs the sound

from the front left/right speakers and

subwoofer only. Multi-channel surround

formats are downmixed to 2-channel.

[Off]: The sound effects are disabled. You

can hear sound as it is recorded.

x [Speaker Settings]

To obtain optimum surround sound, set the

speakers. For details, see “Setting the

Speakers” (page 51).

x [Auto Calibration]

You can calibrate the appropriate settings

automatically. For details, see “Calibrating

the Appropriate Speaker Settings

Automatically” (page 50).

x [Bluetooth AUDIO - AAC]

You can enable and disable AAC audio.

[On]: AAC audio if the Bluetooth device

supports AAC.

[Off]

: SBC audio.

You can enjoy high quality sound if the AAC is

enabled. In case you cannot listen to AAC sound

from your device, select [Off].

Note

Note

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 87 88

Commentaires sur ces manuels

Pas de commentaire