Sony MZ-R90 Instructions d'exploitation Page 72

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 80
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 71
72
zPower sources
You can use the recorder on …
house current.
a nickel metal hydride rechargeable
battery (supplied).
dry battery (not supplied).
It is preferable to use the recorder on house
current when recording for a long time.
Charging a nickel metal
hydride rechargeable battery
See the illustrations in the Japanese text
(page 40).
Before using the supplied nickel metal
hydride rechargeable battery for the first
time, you must charge it.
1 Connect the supplied AC power
adaptor.
2 Insert the NH-14WM into the recorder
and close the lid.
3 Press p/CHARGE.
“Charging” flashes, n appears in
the display, and charging starts.
When charging is completed, battery
indication disappears.
A completely discharged battery takes
about 3 hours to charge fully.
Using on a nickel metal
hydride rechargeable battery
See the illustration in the Japanese text
(page 41).
Be sure the rechargeable battery is fully
charged.
1 Insert the fully charged nickel metal
hydride rechargeable battery with
correct polarity.
3 Press the control towards = or
towards (+ repeatedly.
Pressing the control towards = or
towards (+ causes the phrases
stored in the phrase bank to appear
one by one. If you press P at this time,
the first phrase stored in the phrase
bank retrieved.
4 Press p while the phrase you want is
shown in the display.
The cursor flashes after the phrase you
just retrieved. You can then continue
with labeling operation.
Searching by the first letter of a phrase
1 When labeling a track or disc, use VOL
+/– to move the cursor to the letter
which the desired phrase begins with.
2 Press P to search.
The phrase for that letter appears in
the display. If there are two or more
phrases that start with that letter, press
P to see the next phrase.
3 Press p while the phrase you want is
shown in the display.
The cursor flashes after the phrase you
just retrieved. You can then continue
with labeling operation.
Erasing phrases
1 Press DISPLAY for 2 seconds or more.
2 Press the control towards = or
towards (+ repeatedly until
“BankErase” appears in the display,
and then press p.
3 Press the control towards = or
towards (+ repeatedly until the
phrase you want to erase appears, and
then press p.
“Erase!” appears in the display and the
phrase is erased.
If there is no phrase stored in the
phrase bank, “EMPTY” appears in the
display.
To cancel the operation, press DISPLAY
for 2 seconds or more.
Vue de la page 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Commentaires sur ces manuels

Pas de commentaire