Sony SPP-S9001 Manuel d'utilisateur télécharger pdf (Page 5)

Choose the dialing mode

For the telephone to work properly, select an appropriate dialing mode (tone or pulse).

Depending on your dialing system, set the DIAL

MODE switch as follows:

If your dialing

system Is

Set the switch to

Tone

Pulse

DIAL MODE

switch

If you aren’t sure of your dialing system

Make a trial call with the DIAL MODE switch set to T. If the call connects, leave the switch

as is; otherwise, set to P,

Charge the battery pack

Charge the battery pack for more than 12 hours before you start using your phone.

1 Slide open the battery compartment lid of

the handset.

2 Insert the battery pack into the battery

compartment.

3 Close the batteiy compartment lid.

4 Place the handset on the base unit.

You can place either side facing up.

The CHARGE lamp lights up when the

handset is properly seated on the charge

terminals of the base unit. Charge the

battery pack for more than

12 hours so

that the battery is fully charged. The

CHARGE lamp remains lit even after

charging is completed.

1 2 3 4 5 6 7 8 9 10 ... 25 26

Pas de commentaire

Sony SPP-S9001 Manuel d'utilisateur Page 5