Sony KP- 57WV600 Manuel d'utilisateur télécharger pdf (Page 25)

Cable Box Only

For best results, use this connection if:

□ Your cable company scrambles all channels, which requires you

to use a cable box.

□ You do not have a VCR. (If you have a VCR, see pages 26 and 28.)

With this connection you can:

wJ Use the TV remote control to change channels coming through

the cable box to the TV's VHF/UHF jack. (You must first

program the remote control for your specific cable box.)

With this connection, all channels come into the TV through your cable box and only one

unscrambled signal is sent to the TV, so you cannot use the dual picture features. If some

of your channels are scrambled, but others are not, consider using the "Cable Box and

Cable" connection on page 22 instead.

To connect the cable box

1 Connect the CATV cable to the cable box's input jack.

2 Use a coaxial cable to connect the cable box's output jack to the

TV's VHF/UHF jack.

3 Run the Auto Setup program, as described in "Setting Up the

Channel List" on page 43.

Coaxial cable VHF/UHF

cable

Notes on Using This Connection

To Do This...

Use the cable box

Set up the "rV remote control

to operate the cable box

Activate the remote control to

operate the cable box

Prevent the accidental

switching of TV channels

Do This.

Tune the "rV to the channel the cable box is set to (usually charmel 3 or 4)

and then use the cable box to switch channels.

Program the remote control. See "Programming the Remote Control" on

pages 51-52.

Press SAT/CABLE FUNCTION.

When using the cable box, you need the TV to stay on the channel the cable

box is set to (usually channel 3 or 4). You can use the TV's Channel Fix

feature to lock in a specific channel. For details, see "Using the Channel

Menu" on page 78.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 99 100

Pas de commentaire

Sony KP- 57WV600 Manuel d'utilisateur Page 25