Sony MSAC-US40 Manuel d'utilisateur télécharger pdf (Page 19)

19-GB

Connecting this unit to your computer

PNote

Be sure to install the supplied software before you connect this unit to your

computer. Restart your computer following installation.

Connect the USB port on this unit to a USB port on your computer using

the special USB cable supplied.

On the special USB cable

A connector: This is plugged into the USB port on the computer. Any

ports can be used if the computer is provided with multiple

USB ports.

Mini-B connector: This is plugged into the USB port on this unit.

1 Firmly insert the Mini-B connector of the USB cable into the

USB port on this unit as far as it will go.

2 Plug the A connector of the USB cable into a USB port on your

computer.

•The “Found New Hardware Wizard” starts up and installation of

the driver begins. Depending on the OS, the driver installation may

take place automatically.

•The location of the USB port on the computer differs with the

computer used.

•When using a computer with multiple USB ports, do not connect

other devices, with the exception of a standard mouse and keyboard,

to USB ports at the same time as this unit. When using a desktop

computer, use a USB port on the main unit of the computer. For

details, see “Recommended ways for connecting this unit” on page

20.

USB port

A connector

Mini-B

connector

Access lamp

USB port

* Serial number

(8-digit number on the

backside of this unit)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 42 43

Pas de commentaire

Sony MSAC-US40 Manuel d'utilisateur Page 19