Sony SNC-P5 Manuel d'utilisateur Page 43
- Page / 79
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Administrating the Camera
Configuring the Network — Network setting Menu
43
Default gateway
Type the default gateway.
Obtain DNS server address automatically
Select this to obtain the address of DNS server
automatically. It can be set only when Obtain an IP
address automatically (DHCP) is selected.
Note
When you select Obtain DNS server address
automatically, make sure that DHCP server is active on
the network.
Use the following DNS server address
Select this when you set the fixed address as the IP
address of DNS server.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server.
SSID
Type the service set ID to identify the wireless network
you want to access using up to 32 ASCII characters
(alphanumeric).
For your security, be sure to change the factory setting.
Type
Select the network connection type Ad hoc mode or
Infrastructure mode. Select Ad hoc mode when
connecting to the computer directly, or select
Infrastructure mode when connecting to the computer
via an access point or a radio router. When you select Ad
hoc mode, specify the wireless channel.
Note
The setting of the HTTP port number is common to the
setting of the network cable.
WEP
Select On when you use the WEP (Wired Equivalent
Privacy) keys, or Off when you do not use it.
The WEP key data settings are valid only when the
WEP menu is set to On.
WEP key/Retype WEP key
Specify up to 4 WEP keys. The length of a WEP key is
40 or 104 bit. A 104-bit WEP key has a higher security
level than a 40-bit key. You can type the WEP key either
in hexadecimal numbers (0 to 9 and A to F) or ASCII
characters (alphanumeric).
When the Type menu is set to Infrastructure mode, the
WEP key should be the same as that of the access point.
When the Type menu is set to Ad hoc mode, the WEP
key should be the same as that of the communication
client.
Antenna
When you use dedicated wireless card SNCA-CFW1
(optional) or the wireless LAN antenna SNCA-AN1
(optional) that can be connected to SNCA-CFW1, you
can select one of the following antenna settings.
Internal: The built-in antenna within SNCA-CFW1 is
used for transmission. Suitable for a short-range
sending and receiving because it is non-directional.
External: Select it when you need a long-range sending
and receiving with connecting SNCA-AN1 to
SNCA-CFW1.
Diversity: Select it when you need both a short-range
and a long-range sending and receiving at the same
time while SNCA-AN1 is connected to SNCA-
CFW1.
The high sensitive antenna is selected.
Notes
• When you remove the wireless LAN card, be sure to
first turn off the power of the camera.
• When you use a wireless LAN card, the throughput of
communication data through the Ethernet may
decrease.
- Network Camera 1
- Owner’s Record 2
- NOTICE TO USERS 3
- Table of Contents 4
- — Preset position 5
- Features 6
- Precautions 7
- How to Use This User’s 8
- System Requirements 8
- Preparation 10
- Accessing the Camera 11
- Using the Web Browser 11
- Basic Configuring by the 13
- Administrator 13
- Administrator and User 14
- Logging in to Homepage 15
- About Viewers 16
- Configuration of Main 17
- Camera Control Section 18
- Monitor Image 19
- Controlling the Monitor 20
- Capturing a Monitor 21
- Operating the camera 22
- Controlling the camera 23
- Sending an Image File 24
- Recording a Still Image 25
- Controlling Alarm output 25
- Starting One Time Tour 26
- Switching TCP/UDP 26
- Transmission Mode 26
- Operating the Camera 27
- Basic Operations of 28
- Easy mode 28
- Easy mode (e-Mail) 29
- Administrating the Camera 30
- Basic Operations of Easy mode 30
- Advanced mode Menu 31
- General note on setting menus 32
- Configuring the System 33
- Date & time Tab 34
- Initialize Tab 35
- System log Tab 36
- Access log tab 36
- Setting the Camera 37
- Image and Audio 37
- Picture Tab 38
- MPEG4 Tab 40
- JPEG Tab 40
- Configuring the Network 41
- — Setting of Wireless 42
- PPPoE Tab - Setting of PPPoE 44
- Connection 44
- Setting the User 46
- Setting the Security 47
- Sending an Image via 48
- Sending Images to FTP 51
- Recording Images in 53
- Image Memory Function when 54
- Detecting the Alarm 54
- Directory Structure of Image 56
- Downloading Images 57
- Setting the Alarm Output 58
- Setting the Operations 59
- Alarm output 60
- One Time Tour 60
- Preset position table 60
- OK/Cancel 60
- Setting the Schedule 61
- Setting the Alarm Buffer 61
- Setting the Motion 62
- Detection Function 62
- Motion detection indicator 63
- Sensitivity slider bar 63
- Saving the Camera 64
- Position 64
- Using the Supplied 65
- Setup Program 65
- Date time Tab 66
- PPPoE Tab 66
- Using the SNC audio 67
- Connecting the Camera to the 68
- Computer 68
- Using the SNC video 69
- How to use SNC 70
- Using the Custom 71
- Homepage Installer 71
- Assigning the IP 73
- Address to the Camera 73
- Using ARP Commands 73
- Using the SNMP 74
- Specifications 76
- Supplied accessories 77
- Optional accessories 77
- Sony Corporation 79
Produits connexes et manuels pour Systèmes de vidéosurveillance Sony SNC-P5
(2 pages)
(204 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.066 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels