Sony MEX-BT5000 Manuel d'utilisateur télécharger pdf (Page 18)

Note

Even if the call is ended, the Bluetooth connection is

not cancelled.

Using the Phonebook

Receiving phonebook data from a

cellular phone

1 Select “Phone Settings” from the Bluetooth

function menu.

2 Select “Receive PB.”

“Waiting…” appears.

3 Send the phonebook data by operating the

cellular phone.

“Data Receiving…” appears while receiving

the phonebook data.

“Complete” appears when receiving is

complete.

Note

To cancel the transfer of phonebook data, operate the

cellular phone. Transfer cannot be cancelled from this

unit.

Storing the numbers from “Dialed

Calls” or “Received Calls”

1 Select “Dialed Calls” or “Received Calls”

from the CALL menu.

2 Select the phone number to store, then select

“Save.”

The “Contact Name” display appears.

3 Input a name.

Up to 20 characters can be input.

4 Select “Save?” c “yes.”

Note

Up to 50 phone numbers can be stored in the

Phonebook. If you try to register more than 50

numbers, “Memory Full” appears.

Deleting from the phonebook

1 Select “Phonebook” c “Contact List” from the

CALL menu.

2 Select the name to delete.

3 Select “Delete” c “yes.”

To clear all phonebook data, select “Delete All”

in step 1. After clearing, confirm that all

phonebook data has been cleared properly.

Changing a name in the phonebook

1 Select “Phonebook” c “Contact List” from the

CALL menu.

2 Select the name to change.

3 Select “Edit Name,” then input a new name.

Using the Preset Dial

Storing the Preset Dial

You can store a phone number in the phonebook

to the Preset Dial.

1 Select “Preset Dial” from the CALL menu.

2 Select the preset number (P1 – P6) to store,

then select “Preset Memory.”

3 Select the name to store.

4 Select a phone number of the selected name.

5 Select “yes” when “Save?” appears.

Note

To replace a registered preset number, delete the

existing registration first, then store the new phone

number.

Deleting the Preset Dial

1 Select “Preset Dial” from the CALL menu.

2 Select the preset number to delete.

3 Select “Delete” c “yes.”

Music streaming

Listening to music from an audio

device

You can listen to music of an audio device on this

unit if the audio device supports A2DP

(Advanced Audio Distribution Profile) of

Bluetooth technology.

1 Connect this unit and the Bluetooth

audio device (page 16).

“ ” appears during connection.

2 Turn down the volume on this unit.

3 Press (SOURCE) repeatedly until

“Bluetooth AUDIO” appears.

4 Operate the audio device to start

playback.

5 Adjust the volume on this unit.

Operating an audio device with this

unit

You can perform the following operations on this

unit if the audio device supports AVRCP (Audio

Video Remote Control Profile) of Bluetooth

technology. (The operation differs depending on

the audio device.)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 203 204

Commentaires sur ces manuels

Pas de commentaire

Sony MEX-BT5000 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Autoradio Sony MEX-BT5000