Sony CMT-DX2D Manuel d'utilisateur télécharger pdf (Page 41)

Optional Components

To enhance your system, you can connect optional components. Refer to the operating instructions

provided with each component. North American model is used for illustration purpose.

A DIGITAL OUT (OPTICAL) jack

Use a digital optical cord (square, not supplied)

to connect an amplifier, MD deck or DAT deck

with a digital optical input jack. Sound is then

output when the system function is set to DVD.

By connecting this system to the optical input

jack of the optional amplifier equipped with

Dolby Digital or DTS decoder, you can enjoy

the 5.1 channel sound.

In addition, when the CD or DVD audio is linear

PCM, you can make a digital recording from this

system to an MD deck or DAT deck.

Notes

• When playing MP3 audio tracks, you cannot output

digital audio.

• You can record digital audio from this system only

when DVD function is selected.

• You cannot make a digital recording of a copy

guarded disc using a digital component connected to

this system. Also, playback may not be possible

depending on the connected component.

• When you connect a component that does not support

Dolby Digital or DTS to the DIGITAL OUT

(OPTICAL) jack and output a Dolby Digital or DTS

bit stream, noise may be heard from the connected

component.

B TV IN L/R jacks

Use audio cords (not supplied) to connect an

optional analog component (TV or VCR, etc.) to

these jacks. You can then record or listen to from

the component through this system.

Hooking up optional components

Amplifier or MD deck

From the audio output jack

of the connected

component

TV or VCR, etc.

To the digital input jack of

the digital component

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

Sony CMT-DX2D Manuel d'utilisateur Page 41