Sony LBT-ZUX9 Manuel d'utilisateur télécharger pdf (Page 44)

44

US

For Play Timer:

Press . or > repeatedly until the

audio source you want appears in the

display, then press ENTER. The

display will show the timer settings.

For Recording Timer:

The display will show the timer

settings. Load a recordable tape into

Deck B.

7 Press "/1 to turn off the system.

The system turns on 15 seconds before

the preset time.

Other operations

Notes

• If you use the Play Timer or Recording Timer

and the Sleep Timer at the same time, the

Sleep Timer has priority.

• The Play Timer and Recording Timer will not

be activated if the system is turned on or if

“STANDBY” flashes in the display.

• The volume is reduced to minimum during

Recording Timer.

Changing the display

1

Press AMP MENU repeatedly to

select the item you want.

The last selected setting for the item

appears in the display.

SPECTRUM

Turn on or off the spectrum analyzer

display.

SYSTEM DIMMER

Adjust the brightness of the display.

BEAM DIMMER

Adjust the brightness of the built-in

beam.

ILLUMINATION

Select the pattern of the power

illuminator when the X-ROUND mode

is not selected.

X-ROUND ILLUM

Turn on or off the power illuminator

when the X-ROUND mode is selected.

2 Turn OPERATION DIAL to select

the setting you want.

3 Press ENTER.

Notes

• When you turn MASTER VOLUME (or press

VOLUME +/– on the remote), the power

illuminator shows the current volume level.

• During the demonstration display, you can

turn on or off the power illuminator by

pressing BEAM MODE.

To Do this

Check the setting 1 Press CLOCK/TIMER

SELECT.

“SELECT” appears in

the display.

2 Press . or >

repeatedly to select

“PLAY SELECT?” or

“REC SELECT?”, then

press ENTER.

Change the

setting

Start from step 1.

Cancel the Play

Timer or

Recording Timer

1 Press CLOCK/TIMER

SELECT.

“SELECT” appears in

the display.

2 Press . or >

repeatedly to select

“TIMER OFF?”, then

press ENTER.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Commentaires sur ces manuels

Pas de commentaire