Sony KDL-40V3000 Manuel d'utilisateur télécharger pdf (Page 40)

The picture does not fill the

entire screen or there are

flashing lines around the

edges of the screen

• Change the Display Area setting to enlarge the picture (see page 31).

No sound/Noisy sound

Good picture, no sound • Check the volume control.

• Press MUTING or VOL + so that “Muting” disappears from the screen

(see page 22).

• Disconnect your headphones.

•Set Speakers to TV Speakers in the Audio Options settings (see page 33).

If it is set to Audio System, sound is not output from the TV’s speakers

regardless of the TV’s volume control.

• When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL OUT

(Optical) may not provide an audio signal.

Audio noise • Make sure that the antenna is connected using the 75-ohm coaxial cable (not

supplied).

• Keep the antenna cable away from other connecting cords.

• To avoid TV interference, make sure to use an undamaged antenna cable.

PC Input

No Picture / No Signal • Confirm the PC is correctly connected to the TV with either the PC IN (with

HD15-HD15 cable with ferrite core (not supplied)) or with the HDMI IN.

• Ensure the output signal from the PC is one of the formats listed on page 16.

• Turn the PC off. Confirm the PC connection and restart the PC. Plug and play

will auto-detect the TV and correctly set up PC timing.

•Verify PC Power Management is activated (see page 38).

Poor Picture • Adjust the resolution (see page 16).

•Adjust Pitch and Phase.

General

Wide Mode changes

automatically

• The current Wide Mode setting is automatically replaced with the 4:3

Default setting when you change the channel or video input, if 4:3 Default in

the Screen settings is set to other than Off. If you want to lock in Wide Mode

selected with the WIDE button on the remote control, set 4:3 Default to Off in

the Screen settings (see page 31).

• Check Auto Wide in the Screen settings (see page 31).

Suddenly the picture gets

smaller

• The picture gets smaller during the commercials, this is due to the method the

provider broadcasts their contents. When HD content channels switch to SD

definition content (commercials), the picture may be small with a black border.

“Black box” on screen • You have selected a text option and no text is available (see page 34). To turn off

this feature, set CC Display to Off. If you were trying to select closed

captioning, select CC1 instead of Text1-4.

Black bands appear at the

edges of the screen

• Some wide screen programs are filmed in aspect ratios that are greater than 16:9

(this is especially common with theatrical releases). Your TV will show these

programs with black bands at the top and bottom of the screen. For more

details, check the documentation that came with your DVD (or contact your

program provider).

• Programs in 4:3 aspect ratio will have bands on left and right sides of the

screen.

Certain programs on DVD or

other digital sources display a

loss of detail, especially during

fast-motion or dark scenes

• This is due to the digital compression of the source content used by certain

digital broadcasts and DVDs which may cause your TV’s screen to display less

detail than usual, or cause artifacts (small blocks or dots, pixelations) to appear

on your screen. These signal compressions are more visible and are dependent

on the clarity and resolution of the television.

When playing a video game,

there is delay between the

remote control and the actual

video

• Set the Game/Text Mode to ON (see page 32).

Condition Explanation/Solution

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Commentaires sur ces manuels

Pas de commentaire

Sony KDL-40V3000 Manuel d'utilisateur Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Sony KDL-40V3000