Sony SDM-P234 Manuel d'utilisateur Page 19

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 26
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 18
19
GB
Technical Features
Power saving function
This monitor meets the power-saving guidelines set by VESA,
ENERGY STAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPM (Display Power
Management) Standard compliant, the monitor will automatically
reduce power consumption as shown below.
* When your computer enters the “active off” mode, the input signal is
cut and “NO INPUT SIGNAL” appears on the screen. After 5
seconds, the monitor enters the power saving mode.
“Deep sleep” is a power saving mode defined by the Environmental
Protection Agency.
Reducing the power consumption
(ECO mode)
If you touch ECO on the front of the monitor repeatedly, you can
select the screen brightness.
Each mode appears on the screen and the screen brightness is
reduced according to the mode. The menu automatically
disappears after about 5 seconds.
Screen brightness and power consumption are reduced as the
mode changes from HIGH to MIDDLE to LOW.
The default setting of the screen brightness is set to “MIDDLE”.
When you select “AUTO,” the monitor automatically adjusts the
screen brightness according to the brightness of the surroundings
(automatic brightness adjustment function). For more
information, see “Automatic brightness adjustment function
(light sensor)” on page 19.
Note
When the ECO mode is set to “HIGH,” “MIDDLE,” or “LOW,”
BACKLIGHT, CONTRAST and BRIGHTNESS of the menu are
available (page 13).
You cannot select “sRGB” in the COLOR menu when the ECO mode
is set to “AUTO.”
Automatic brightness adjustment
function (light sensor)
This monitor is provided with a feature to automatically adjust the
screen brightness according to the brightness of the surroundings.
The brightness of the screen is set to the most appropriate level by
setting the ECO mode to “AUTO” with ECO on the front of the
monitor, or in the PICTURE ADJUST menu. The default setting
of the screen brightness is set to “MIDDLE”. Also, when you set
the ECO mode to “AUTO” with ECO on the front of the monitor,
the adjustment bar is also displayed. You can adjust the bar with
m/M. Screen brightness changes according to the level you set.
Power mode Power consumption
1 (power)
normal
operation
80 W (max.) green
ECO mode green
active off*
(deep sleep)
1.0 W (max.) orange
1 (power) off 1.0 W (max.) red
main power off 0 W off
ECO
50
ECO HIGH
:
ECO MIDDLE
:
ECO LOW
:
ECO AUTO
:
,
Vue de la page 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Commentaires sur ces manuels

Pas de commentaire