Sony HT-XF9000 Manuel d'utilisateur télécharger pdf (Page 47)

47

GB

For details, see “When the TV Remote

Control does not Work” (page 25).

[Auto Standby]

[On]: Turns on the [Auto Standby]

function. When you do not operate the

system while no signal is input for about

20 minutes, the system enters standby

mode automatically.

[Off]: Off

[Device Name Setting]

You can change the name of this system

according to your preference so that it is

more recognizable when using the

[Bluetooth Audio] function. Follow on-

screen instructions and use the

software keyboard to enter the name.

[Software License Information]

You can display the Software License

Information.

[Software Version]

The software version is displayed.

You can reset the system settings to the

factory default by selecting the group of

settings. All the settings within the

group will be reset.

For details, see “Resetting the System”

(page 55).

You can update the software of the

system. For details, see “Updating the

Software” (page 47).

Updating the Software

By updating your software to the latest

version, you can take advantage of the

newest functions.

For information about update functions,

visit the following website:

www.sony.eu/support

• It may take up to 40 minutes for the

update to be completed.

• While the updating operation is in

progress, do not turn on or off the system,

disconnect the AC power cord (mains

lead), disconnect/connect the HDMI

cable, or operate the system or TV. Wait

for the software update to complete.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] - [Advanced

Settings] on the home menu.

3 Select [Software Update].

For details of updating, refer to the

instructions displayed when

downloading the update file.

The updating proceeds as follows.

1 When a software update starts,

all the indicators on the main unit

flash 4 times quickly. Then the

system automatically reboots.

2 During a software update, the

indicators on the main unit flash.

The flashing indicators increase

from 1 to 5 associated with the

updating progress.

3 After the update is complete, all

the indicators on the main unit

flash twice quickly, then the

system automatically reboots.

[Resetting]

[Software Update]

Notes

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 71 72

Commentaires sur ces manuels

Pas de commentaire