Sony SNC-M3 Manuel d'utilisateur télécharger pdf (Page 1)

The Quick Start Guide briefly explains the connections and settings of the camera for viewing the

camera image via Internet when connecting to the network using a router.

For the installation and operations of the camera, please refer to the Installation Manual and the

User's Guide in the supplied CD-ROM.

Flowchart of preparations

System Configuration

You can monitor the image of the camera via LAN and Internet.

Notes

• For viewing the camera image via Internet, the global IP address provided by ISP is required.

• The SNC-M1/M1W/M3/M3W network cameras do not support PPPoE. Use a router compliant with PPPoE if you use ISP with PPPoE

connection.

Check the supplied accessories

and system reguirements.

Use the

camera.

Install the

camera.

Set up the

camera.

Connect the

camera.

Quick Start Guide (this document) Installation Manual User’s Guide

Internet

Microphone

Router

Network Camera

SNC-M1/M1W

SNC-M3/M3W

Wireless*

Computer

Speaker

Modem

Computer

Web browser

LAN

* Wireless LAN connection is available only for the SNC-M1W and SNC-M3W.

3-863-913-11 (1)

Network Camera

SNC-M1/M1W/M3/M3W

Quick Start Guide Network Configuration Using a Router

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Network Camera

The Quick Start Guide briefly explains the connections and settings of the camera for viewing the camera image via Internet when connecting to the net

Page 2 - Computer

Check the Camera and Supplied Accessories / Check the Specifications of the Computer 21 Check the Camera and Supplied AccessoriesBefore using, check t

Page 3 - 3 to the adaptor

Connect the Camera to the Router / Turn on the Power of the Camera3 • Adobe, Acrobat and Acrobat Reader are trademarks of Adobe Systems Incorporated i

Page 4 - 2 Click

Install the IP Setup Program from the CD-ROM 45 Install the IP Setup Program from the CD-ROMThis section explains how to install the IP Setup Program

Page 5 - 6 Set up the Camera

Set up the Camera5 7Enter or select the name of the folder in which to install the program, then click “Next.”The default setting is “IP Setup Program

Page 6

Set Port Forwarding on the Router 6To assign a static IP addressClick on “Use the following IP address” and enter the IP address, subnet mask and defa

Page 7 - Start Internet Explorer

Monitor the Image of the Camera7 8 Monitor the Image of the CameraYou can monitor the image of the camera using Internet Explorer as the Web browser.A

Page 8 - (SNC-M1W/M3W only)

Setting for Wireless Network (SNC-M1W/M3W only)To use the camera in a wireless network via an access point, set as follows.Use the network cable for c