Sony SNC-M3 Manuel d'utilisateur télécharger pdf (Page 8)

Setting for Wireless Network

(SNC-M1W/M3W only)

To use the camera in a wireless network via an access

point, set as follows.

Use the network cable for connection when you assign a

new IP address to the SNC-M1W/M3W wireless network

camera.

Display the welcome page of the

camera following the procedure of

“Monitor the Image of the Camera” on

page 7.

Click “Setting.”

Type the user name and password for

the administrator, then click “OK.”

The default settings of both items are “admin.”

The “Administrator” menu is displayed.

Click “Network.”

The “Network setting” menu appears.

Click the “Wireless network” tab.

Set the items for the wireless network.

a Select “Infrastructure” on “Type.”

b Enter the “SSID” to match the setting on the

access point.

c Enter the “WEP key data” to match the

settings on the access point.

d Click “OK.”

Turn off the power of the camera.

Remove the network cable from the

camera.

Turn on the power of the camera

without connecting the network cable.

The Wireless setting is now enabled.

Click.

Type the user name.

Type the password.

Click.

1 Infrastructure

3 WEP key

data

2 SSID

4 OK

Sony Corporation

1 2 3 4 5 6 7 8

Pas de commentaire

Sony SNC-M3 Manuel d'utilisateur Page 8