Sony HT-NT5 Manuel d'utilisateur télécharger pdf (Page 61)

61

GB

Troubleshooting

 Increase the volume on the system or

cancel muting.

 If sound of a cable TV (CATV) box/

satellite tuner connected to the TV is

not output, connect the device to a

HDMI IN jack of the system and switch

input of the system to the input for

the connected device (HDMI IN 1/2/3)

(refer to the supplied Startup Guide).

 Depending on the order in which you

connect the TV and the system, the

system may be muted and “MUTING”

is displayed on the front panel display

of the system. If this happens, turn on

the TV first, then the system.

 Set the speakers setting of the TV

(BRAVIA) to Audio System. Refer to

the operating instructions of your TV

regarding how to set the TV.

Picture and sound are not output

from the TV when the system is not

turned on.

 Set on the system [System Settings] -

[HDMI Settings] - [Control for HDMI]

to [On], and then set [Standby

Through] to [Auto] or [On] (page 54).

 Turn on the system, and then switch

the input to that for the device

playing.

 If connected to devices other than

those manufactured by Sony that

support the Control for HDMI

function, set [System Settings] -

[HDMI Settings] - [Standby Through]

to [On] (page 54).

The sound is output from both the

system and the TV.

 Mute the sound of the system or the

TV.

The TV sound from this system lags

behind the image.

 Set [A/V SYNC] to 0 msec if it is set to

the range between 25 msec and 300

msec (page 28).

No sound or only very low-level

sound of the device connected to

the system is heard.

 Press  + on the remote control and

check the volume level (page 10).

 Press  or  + on the remote control

to cancel the muting function

(page 10).

 Make sure the input source is

selected correctly. You should try

other input sources by pressing

INPUT +/– on the remote control

several times (page 12).

 Check that all the cables and cords of

the system and the connected device

are firmly inserted.

 When you play content compatible

with copyright protection technology

(HDCP), it may not be output from the

system.

 Set [System Settings] - [HDMI

Settings] - [HDMI Signal Format] to

[Standard format] (page 54).

No sound or only very low-level

sound is heard from the subwoofer.

 Press SW  + on the remote control

to increase the subwoofer volume

(page 28).

 Make sure that the power indicator

on the subwoofer is lit in green. If not,

see “No sound is heard from the

subwoofer.” (page 64).

 The subwoofer is for reproducing

bass sound. In the case of input

sources that contain very little bass

sound components (i.e., a TV

broadcast), the sound from the

subwoofer may be difficult to hear.

The surround effect cannot be

obtained.

 Depending on the input signal and

the sound field setting, surround

sound processing may not work

effectively. The surround effect may

be subtle, depending on the program

or disc.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 83 84

Commentaires sur ces manuels

Pas de commentaire