Sony XBA-BT75 Manuel d'utilisateur télécharger pdf (Page 11)

11

GB

XBA-BT75 [CE7 (GB, FR, DE, ES, NL)] 4-411-333-41(1)

Pairing

What is pairing?

Bluetooth devices need to be “paired”

with each other beforehand.

Once Bluetooth devices are paired, there

is no need for pairing again, except in the

following cases:



Pairing information is deleted after

repair, etc.



When you attempt to pair with 9 or

more devices.

This unit can be paired with up to 8

devices; if a new device is paired after 8

devices have been paired, the device

whose latest connection time is the

oldest among the 8 paired devices is

replaced by the new one.



When recognition of the unit by the

device to be connected is deleted.



This unit is initialised (page 24). All

pairing information is deleted.

Pairing procedures

Before pairing, charge the headset (page

8, 9).

1 Place the Bluetooth device within

1 m of this unit.

2 While this unit is turned off, press

and hold the button until the

indicator flashes blue and red

alternately.

The unit enters pairing mode. (It

takes about 7 seconds normally to

enter pairing mode. When pairing for

the first time, or the unit is initialised,

etc., pairing takes about 2 seconds.)

(Multi function) button

Note

If pairing is not established within about

5 minutes, pairing mode will be

cancelled and this unit will turn off. In

this case, start over from step 1.

3 Perform the pairing procedure on

the Bluetooth device to detect this

unit.

The list of detected devices appears on

the display of the Bluetooth device.

This unit is displayed as “XBA-BT75.”

If “XBA-BT75” is not displayed,

repeat from step 1.

Note

For details, refer to the operating

instructions supplied with the Bluetooth

device.

Continued

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 131 132

Commentaires sur ces manuels

Pas de commentaire