Sony BDP-S1200 Manuel d'utilisateur Page 33

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 44
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 32
33
Additional Information
The player cannot connect to the
network.
, Check the network connection
(page 15) and the network settings
(page 29).
The message [A new software version
is available. Please go to the “Setup”
section of the menu and select
“Software update” to perform the
update.] appears on the screen when
turning the player on.
, See [Software Update] (page 25) to
update the player to a newer software
version.
The [Control for HDMI] function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] in
[HDMI Settings] is set to [On]
(page 28).
, If you change the HDMI connection,
turn the player off and on again.
, If power failure occurs, set [Control
for HDMI] in [HDMI Settings] to
[Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 28).
, Check the following and refer to the
instruction manual supplied with the
component.
the connected component is
compatible with the [Control for
HDMI] function.
the connected component’s setting
for the [Control for HDMI] function
is correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
if the AV amplifier (receiver) is not
compatible with the [Control for
HDMI] function, you may be unable
to control the TV from the player.
if you change the HDMI
connection, disconnect and
reconnect the AC power cord
(mains lead), or a power failure
occurs, try the following:
1Switch
the input selector of the AV
amplifier (receiver) so that the
picture from the player appears on
the TV screen.
2Set [Control for
HDMI] in [HDMI Settings] to [Off],
then set [Control for HDMI] in
[HDMI Settings] to [On] (page 28).
Refer to the instruction manual
supplied with the AV amplifier
(receiver).
The System Power-Off function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] and
[Linked to TV-off] in [HDMI Settings]
are set to [On] (page 28).
Playback does not start from the
beginning of content.
, Press OPTIONS, and select [Play from
start].
Network connection
Control for HDMI (BRAVIA
Sync)
Others
Vue de la page 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Commentaires sur ces manuels

Pas de commentaire