Sony BDP-S5100 Manuel d'utilisateur télécharger pdf (Page 34)

34

The player cannot connect to the

network.

, Check the network connection

(page 15) and the network settings

(page 30).

The PC cannot connect to the Internet

after [Wi-Fi Protected Setup (WPS)] is

performed.

, The wireless settings of the router may

change automatically if you use the

Wi-Fi Protected Setup function before

adjusting the settings of the router. In

this case, change the wireless settings

of your PC accordingly.

You cannot connect the player to the

wireless LAN router.

, Check if the wireless LAN router is on.

, Depending on the surrounding

environment, such as the wall material,

radio wave receiving condition, or

obstacles between the player and the

wireless LAN router, the

communication distance may be

shortened. Move the player and the

wireless LAN router closer to each

other.

, Devices that use a 2.4 GHz frequency

band, such as a microwave, Bluetooth,

or digital cordless device, may

interrupt the communication. Move

the player away from such devices, or

turn off such devices.

The desired wireless router do not

appear in the wireless network list.

, Press RETURN to return to the

previous screen, and try wireless setup

again. If the desired wireless router is

still not detected, press RETURN to

select [Manual registration].

The message [A new software version

is available. Please go to the “Setup”

section of the menu and select

“Network update” to perform the

update.] appears on the screen when

turning the player on.

, See [Network Update] (page 25) to

update the player to a newer software

version.

The PARTY STREAMING function

cannot start.

, Check that [PARTY Auto Start] in

[Network Settings] setup is set to [On]

(page 31).

The [Control for HDMI] function does

not work (BRAVIA Sync).

, Check that [Control for HDMI] in

[HDMI Settings] is set to [On]

(page 29).

, If you change the HDMI connection,

turn the player off and on again.

, If power failure occurs, set [Control

for HDMI] in [HDMI Settings] to

[Off], then set [Control for HDMI] in

[HDMI Settings] to [On] (page 29).

Network connection

Control for HDMI (BRAVIA

Sync)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Commentaires sur ces manuels

Pas de commentaire