Sony DCR-PC105 Instructions d'exploitation télécharger pdf (Page 50)

Recording still images on a “Memory Stick” during tape recording

standby or tape recording

During tape recording

The POWER switch should be set to .

Press PHOTO deeper.

The image displayed on the screen when you pressed PHOTO deeper will be recorded

on the “Memory Stick.”

Recording on the “Memory Stick” is complete when the bar scroll indicator disappears.

Note

You cannot record still images on a “Memory Stick” while using the following functions

(The indicator flashes):

– End search

– Wide mode

– While fading in with BOUNCE

– MEMORY MIX

“Memory Stick”

See page 112 for details.

Still images

•The image size will be 640 × 480.

•If the POWER switch is set to CAMERA, image quality cannot be changed. Images

will be recorded with image quality as set when the POWER switch is set to

MEMORY. (The default setting is FINE.)

To record images with higher image quality, use of memory photo recording is

recommended (p. 120).

Recording with the flash

During recording standby, you can record still images on the “Memory Stick” with the

flash. See page 124 for details.

When you press PHOTO on the Remote Commander

Your camcorder immediately records the image that is on the screen when you press

the button.

To record still images on the “Memory Stick” during tape recording

You cannot check an image on the screen by pressing PHOTO lightly.

During and after recording still images on the “Memory Stick”

Your camcorder continues recording on the tape.

Title

You cannot record titles.

Self-timer recording

During recording standby, you can record still images on the “Memory Stick” with the

self-timer. See page 52 for details.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 239 240

Pas de commentaire

Sony DCR-PC105 Instructions d'exploitation Page 50