Sony CDX-3180 Manuel d'utilisateur télécharger pdf (Page 13)

Release key

(supplied)

Additional Information

Fuse (10 A)

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one

that matches the amperage described on the

fuse. If the fuse blows, check the power

connection and replace the fuse. If the fuse

blows again after replacement, there may be an

internal malfunction. In such a case, consult

your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. To prevent this, open the

front panel by pressing (RELEASE), then

detach it and clean the connectors with a

cotton swab dipped in alcohol. Do not apply

too much force. Otherwise, the connectors may

be damaged.

Main unit

Back of the front panel

Dismounting the unit

Pull the unit out while the release key is inserted.

Press the clip inside the front cover with a thin

screwdriver, and lever the front cover free.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Pas de commentaire

Sony CDX-3180 Manuel d'utilisateur Page 13