Sony DAR-RD100 Manuel d'utilisateur télécharger pdf (Page 80)

Audio Settings

The [Audio] Setup allows you to adjust the sound

according to the playback and connection

conditions.

Select [Audio] in the Setup Display. To use the

display, see “Using the Setup Displays” (page 74).

Underlined below are the default settings

optimized for the best surround effect with the

supplied speaker system.

[Dolby Digital] (DVDs only)

Selects the type of Dolby Digital signal when

using the DIGITAL OUT (OPTICAL or

COAXIAL) jack.

Note

If [D-PCM] is selected, surround effect will be lost in

some Sound Field settings.

[DTS] (DVD VIDEO only)

Selects whether or not to output DTS signals when

using the DIGITAL OUT (OPTICAL or

COAXIAL) jack.

Note

If [Off] is selected, no sound will be heard from the

supplied speakers when playing a DTS soundtrack on a

DVD.

[MPEG] (DVD VIDEO only)

Selects the type of MPEG audio signal when using

the DIGITAL OUT (OPTICAL or COAXIAL)

jack.

Note

The supplied speaker system does not accept MPEG

audio signals. If [Bitstream] is selected, no sound will be

output from the speakers.

[Sampling Freq.] (DVD VIDEO only)

Selects the sampling frequency of the audio

signal.

Note

If [96kHz] is selected, surround effect will be lost in

some Sound Field settings.

[Audio DRC] (Dynamic Range Control) (Dolby

Digital DVDs only)

Makes the sound clear when the volume is turned

down when playing a DVD that conforms to

[Audio DRC]. This affects the output from the

following jacks:

– LINE 2 OUT (AUDIO L/R) jacks

– LINE 1-TV jack

– LINE 3/DECODER jack

[ D-PCM ] Select this when the recorder is

connected to an audio component

without a built-in Dolby Digital

decoder.

[ Dolby

Digital ]

Select this when the recorder is

connected to the speaker system.

[ Off ] Select this when the recorder is

connected to an audio component

without a built-in DTS decoder.

[ On

] Select this when the recorder is

connected to the speaker system.

Dolby Digital

Audio

DTS

MPEG

D-PCM

Dolby Digital

Sampling Freq.

Audio DRC

Vocal

[ PCM ] Select this when the recorder is

connected to the speaker system.

If you play MPEG audio sound

tracks, the recorder outputs stereo

signals via the DIGITAL OUT

(OPTICAL or COAXIAL) jack.

[ Bitstream ]

Select this when the recorder is

connected to an audio component

with a built-in MPEG decoder.

[ 48kHz

] The audio signals of DVD

VIDEOs are always converted to

48 kHz/16 bit.

[ 96kHz ] All types of signals, including

96 kHz/24 bit, are output in their

original format.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 507 508

Commentaires sur ces manuels

Pas de commentaire

Sony DAR-RD100 Manuel d'utilisateur Page 80

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Sony DAR-RD100