Sony DAV-HDX686W Manuel d'utilisateur Page 97

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 116
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 96
Additional Information
97
US
Surround amplifier operation
If no sound is output from the surround speakers, check the status of the POWER / ON LINE indicator
on the surround amplifier. For details of the POWER / ON LINE indicator, see “Step 3: Setting up the
Wireless System” (page 34).
Symptom Remedy
The power is not turned on. • Check that the AC power cord (mains lead) is connected securely.
The POWER / ON LINE
indicator does not turn on.
Turn off the surround amplifier and remove the AC power cord (mains lead) of
the surround amplifier, then check the following items.
Are the + and – speaker cords short-circuited?
Is anything blocking the ventilation holes of the surround amplifier?
• After checking the above items and fixing any problems, connect the AC power
cord (mains lead) of the surround amplifier and turn on the surround amplifier.
If the cause of the problem cannot be found even after checking all the above
items, consult your nearest Sony dealer.
There is no sound. Check the status of the POWER / ON LINE indicator on the surround amplifier.
turns green
The speaker cord is not connected securely.
Check the speaker connections and settings.
The volume of the S-AIR main unit is set to minimum.
The S-AIR main unit is in mute status.
Depending on the source or the settings of the S-AIR main unit, the effect of
the speakers may be less noticeable.
Headphones are connected.
flashes green
The S-AIR main unit is not turned on.
Pair the S-AIR main unit with another S-AIR sub unit.
The surround amplifier is paired to another S-AIR main unit.
Confirm the S-AIR IDs of the S-AIR main unit and surround amplifier being
the same ID (page 74).
Pairing operation is not completed.
Sound transmission is poor.
Move the surround amplifier so that the POWER / ON LINE indicator turns
green.
Move the system away from another wireless devices.
Avoid using any other wireless devices.
The wireless transceiver(s) is/are not inserted correctly.
turns red
Set the SURROUND SELECTOR switch of the surround amplifier to
SURROUND.
“HP NO LINK” and “VOLUME
MIN” appear alternately in the
front panel display, and the
volume of the unit becomes
minimum.
Volume becomes minimum when you turn off the surround amplifier with
headphones connected before you turn off the unit or if radio reception is poor.
In these cases, check radio reception, and set the volume again.
Vue de la page 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 115 116

Commentaires sur ces manuels

Pas de commentaire