Sony TA-F5000 Manuel d'utilisateur télécharger pdf (Page 2)

2

GB

On the prevention of howling

Do the following:

—lower the volume.

—keep the turntable as far from the

speakers as possible.

—use commercially available audio

insulators on the bottom of the

turntable.

—keep the microphone away from the

speakers during use.

For further protection against howling,

set the speakers or turntable on top of a

heavy wooden board or concrete slab.

If you have any questions or

problems concerning your amplifier,

please consult your nearest Sony

dealer.

WARNING

To prevent fire or shock

hazard, do not expose the unit

to rain or moisture.

To avoid electrical shock, do

not open the cabinet. Refer

servicing to qualified

personnel only.

Do not install the appliance in

a confined space, such as a

bookcase or built-in cabinet.

Precautions

On safety

• Do not disassemble the cabinet as this

may result in an electrical shock.

Refer servicing to qualified personnel

only.

• Should any solid object or liquid fall

into the cabinet, unplug the amplifier

and have it checked by qualified

personnel before operating it any

further.

On power sources

• Before operating the amplifier, check

that the operating voltage of the

amplifier is identical with your local

power supply. The operating voltage

is indicated on the nameplate at the

rear of the amplifier.

• If you are not going to use the

amplifier for a long time, be sure to

disconnect the amplifier from the wall

outlet. To disconnect the AC power

cord (mains lead), grasp the plug

itself; never pull the cord.

On placement

• Place the amplifier in a location with

adequate ventilation to prevent heat

built-up and prolong the life of the

amplifier.

• Do not place the amplifier near heat

sources, or in a place subject to direct

sunlight, excessive dust or mechanical

shock.

• Do not place anything on top of the

cabinet that might block the

ventilation holes and cause

malfunctions.

On operation

Before connecting other components, be

sure to turn off and unplug the

amplifier.

On cleaning the amplifier

Clean the cabinet, panel and controls

with a soft cloth slightly moistened with

a mild detergent solution. Do not use

any type of abrasive pad, scouring

powder or solvent such as alcohol or

benzine.

1 2 3 4 5 6 7 ... 88 89

Commentaires sur ces manuels

Pas de commentaire