Sony NEX-VG900E Manuel d'utilisateur télécharger pdf (Page 45)

45

Table of Contents Search image Index

GB

Indoor ()

The white balance is appropriately adjusted

for the following recording conditions:



Indoors



At party scenes or studios where the

lighting conditions change quickly



Under video lamps in a studio, or under

sodium lamps or incandescent-like color

lamps

Color Temp. ( )

The white balance is adjusted according to

the color temperature of the light source:



Select [Color Temp.] , then set it with

+/- on the LCD screen.

One Push ( )

The white balance will be adjusted

according to the ambient light.



Touch [ ].



Frame a white object such as a piece of

paper, to fill the screen under the same

lighting conditions as you will shoot the

subject.



Touch [ ].

Notes

Set [White Balance] to [Auto] or adjust

the color in [One Push] under white or

cool white fluorescent lamps.

When you select [One Push], keep

framing white objects.

While the camcorder is recording a

movie,

is grayed out and [One Push]

cannot be set.

Tips

If you have changed the battery pack while

[Auto] was selected, or taken your camcorder

outdoors after inside use (or vice versa), aim

your camcorder at a nearby white object for

about 10 seconds for better color balance

adjustment.

When the white balance has been set with [One

Push], if the lighting conditions changed by

bringing your camcorder outdoors from inside

the house, or vice versa, you need to redo the















[One Push] procedure to readjust the white

balance.

You can adjust the white balance B-A (blue to

amber), or G-M (green to magenta) by touching

[OPTION].

When [WB Color Temp.], [WB B-A] or [WB

G-M] is assigned to the MANUAL button

(p

. 49), the value can be adjusted by pressing the

MANUAL button and rotating the MANUAL

di

al (p. 47). If the MANUAL button is pressed

again, [Auto] is set in the case of [WB Color

Temp.], and the setting becomes ineffective in

the case of [WB B-A] or [WB G-M].

Setting the Zebra Pattern

You can display a zebra pattern as a guide

for adjusting brightness. The zebra pattern

will not be recorded with the image.

Press ZEBRA.

(brightness level) appears on the screen.

You can select a brightness level between 70 and

100+ in 5 IRE f

rom the menu (p. 76).

Press ZEBRA again to cancel.

Notes

With a subject that exceeds a brightness level of

100 IRE, the image may become overexposed.

Tips

IRE (Institute of Radio Engineers) is a measure

of the video signal level that is used as the bases

of brightness; the reference level (pedestal

level) is set to 0 (%) and the maximum level

(completely white level) is set to 100 (%).













ZEBRA button

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 115 116

Commentaires sur ces manuels

Pas de commentaire