Sony VPL-CX4 Manuel d'utilisateur télécharger pdf (Page 31)

31

GB

Maintenance

Maintenance

B

Maintenance

Maintenance

When the lamp has burnt out or dims, or

“Please replace the LAMP.” appears on the

screen, replace the lamp with a new one. Use

LMP-C121 Projector Lamp as the

replacement lamp. The lamp life varies

depending on conditions of use.

When replacing the lamp after using

the projector

Turn off the projector, then unplug the

power cord.

Wait for at least an hour for the lamp to cool.

The lamp becomes a high temperature after

turning off the projector with the I / 1 key. If

you touch the lamp, you may scald your

finger. When you replace the lamp, wait for

at least an hour for the lamp to cool.

1

Place a protective sheet (cloth)

beneath the projector. Turn the

projector over so you can see its

underside.

Be sure that the projector is stable after

turning it over.

2

Open the lamp cover by loosening a

screw with the Phillips screwdriver

(supplied with the Projector Lamp).

For safety sake, do not loosen any other

screws.

3

Loosen the screws on the lamp unit

with the Phillips screwdriver. Pull out

the lamp unit by the handle.

4

Insert the new lamp all the way in until

it is securely in place. Tighten the

screws. Fold up the handle.

• Be careful not to touch the glass surface

of the lamp.

• The power will not turn on if the lamp is

not secured properly.

5

Close the lamp cover and tighten the

screws.

6

Turn the projector back over.

Replacing the Lamp

Caution

Note

Note

Notes

Handle

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 131 132

Commentaires sur ces manuels

Pas de commentaire