Sony SAT-A4 Manuel d'utilisateur télécharger pdf (Page 72)

Setting the Security Code

(SAT-A4 Only)

If the Digital Satellite Receiver is accepting or receiving signals from

another RF remote control in your home (or from a neighbor's house),

you can eliminate this problem by changing the security codes for the

Digital Satellite Receiver and remote control.

J^ote

/Is an alternative, you can eliminate this problem by disabling the RF

capability of the Digital Satellite Receiver, if you have no need for RF

transmission. See “Selecting IR/RF Transmission (SAT-A4 Only)" on page 71

for details.

There are tw'o steps to changing the RF security code: Step 1 is

changing the Digital Satellite Receiver's security code; step 2 is

changing the remote control's security code. Both the Digital Satellite

Receiver and the remote control must use the same three-digit security

code.

The Digital Satellite Receiver and

remote control are shipped with the RF

security code set to 000.

Step 1: Select the Digital Satellite Receiver's RF Security Code

Select REMOTE CONTROL from the Setup Menu.

Select RF SECURITY CODE and then select a different security

code.

SET UP REMOTE

REMOTE SIGNAL

REMOTE CODES

IR ONLY

RE SECURITY CODE

Select the RE security

code for the Digital

Satellite Receiver.

CODE 001

CODE 002

CODE 003

CODE 004

CANCEL

IDENTIFY

HELP

Select OK to save your changes and return to the Setup Menu.

Go to "Step 2: Set the Remote Control's RE Security Code" on page

73 to continue.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 95 96

Pas de commentaire

Sony SAT-A4 Manuel d'utilisateur Page 72