Sony MHC-EX600 Instructions d'exploitation télécharger pdf (Page 12)

12

GB

Before using the USB

device

Check the websites below for the

information about compatible USB

devices.

For customers in Europe and Russia:

<http://support.sony-europe.com/>

For customers in Latin America:

<http://www.sony-latin.com/index.crp>

For customers in other countries/regions:

<http://www.sony-asia.com/support>

Notes

• When USB cable connection is necessary, use

the USB cable supplied with the USB device.

• When the USB device is connected,

“READING” appears and “USB MEMORY”

lights up on the display.

• It may take about 10 seconds before

“READING” appears depending on the type

of USB device connected.

• Do not connect the system and the USB

device through a USB hub.

• When the USB device is connected, the

system reads all the files on the USB device.

If there are many folders or files on the USB

device, it may take a long time to finish

reading the USB device.

• With some connected USB devices, after an

operation is performed, there may be a delay

before it is performed by this system.

• Compatibility with all encoding/writing

software cannot be guaranteed. If audio files

on the USB device were originally encoded

with incompatible software, those files may

produce noise or interrupted audio, or may not

play at all.

• This system cannot transfer music from a disc

or play audio files on the USB device in the

following cases.

– When the number of audio files in a folder

exceeds 999.

– When the total number of audio files on a

USB device exceeds 5,000.

– When the number of folders on a USB

device exceeds 255 (including the “ROOT”

and “MUSIC” folders, and excluding empty

folders).

These numbers may vary depending on the

file and folder structure. Do not save other

types of files or unnecessary folders on a USB

device that has audio files.

To select the memory on the USB

device

If the USB device has more than one

memory (for example, internal memory

and a memory card), you can select which

memory to use and then start playback or

transferring.

You cannot select a memory during

playback or transferring. Make sure to

select a memory before starting playback

or transferring.

1 Press USB (or FUNCTION

repeatedly) to select the USB

function.

2 Connect the USB device to the

(USB) port.

3 Press OPTIONS on the unit in stop

mode.

“MEM SEL” appears. If an audio file

or a folder is selected, “ERASE”

appears instead. Press ./>

repeatedly to select “MEM SEL.”

4 Press ENTER.

5 Press ./> repeatedly to

select a memory number.

Proceed to step 6 if only one memory

can be selected.

To cancel this operation, press

OPTIONS.

6 Press ENTER.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Commentaires sur ces manuels

Pas de commentaire