Sony MZ-R90 Instructions d'exploitation télécharger pdf (Page 62)

62

Recording with digital(optical)

input (optical cable required)

See the illustration in Japanese text (page

16.

Connect to a digital source using an optical

cable (POC-5B or POC-5AB, not supplied)

to make digital recordings. Digital

recording is possible even from digital

equipment with different sampling rates,

such as a DAT deck or a BS tuner, using

the built-in sampling rate converter.

1 Connect the LINE IN (OPTICAL) jack

of the recorder to the optical digital

output jack of the source with an

optical cable (not supplied).

The recorder switches to digital input

automatically.

2 Connect the power source.

To use on AC power, see “Recording

an MD right away!.” To use on other

power sources, see pages 72 and 73.

3 Insert a recordable MD.

Slide OPEN to open the lid, insert a

recordable MD, and close the lid.

4 Press and slide REC to the right.

“REC” lights up and recording starts.

5 Play the sound source.

To stop recording, press p.

Notes

•You can make a digital recording only from

an optical type output.

•When recording from a portable CD player,

play it on AC power and disable the anti-

skip function (such as ESP*).

•Digital output may be disabled on some

portable CD players when the player is not

run on AC power.

* Electronic Shock Protection

Synchro-recording from a

digital source

See the illustration in Japanese text (page

17).

You can easily dub a digital source on an

MD by using the SYNCHRO REC switch.

Before synchro-recording, be sure to make

digital connection and insert a recordable

MD. Note that track marks are

automatically marked at the same positions

as the source.

1 Slide the SYNCHRO REC switch to

ON.

“SYNC” lights up in the display.

2 Slide REC to the right.

“REC” lights up in the display.

The recorder starts recording when

you start playing the source player.

To stop recording, press p.

Notes

•Do not switch SYNCHRO REC after step 2.

Recording may not be made properly.

•When recording in monaural, follow steps 1

to 3 of “Recording in monaural for double

the normal recording time” (page 63), and

then do steps of synchro-recording.

•Even when there is no recorded sound on

the sound source, there may be cases when

recording does not pause automatically

during synchro-recording due to the noise

level emitted from the sound source.

•If a silent portion is encountered for 2

seconds or more during synchro-recording,

a new track mark is automatically added at

the point where the silent portion ends.

• Synchro-recording cannot be done if the

connecting cord is not an optical cable, or if

the cable is connected to the MIC (PLUG IN

POWER) jack.

•You cannot adjust the recording level

manually during synchro-recording.

Same as the

source.

You can also

adjust it

manually

(Digital REC

level

control).

1)

When recording a CD or an MD, track

numbers are automatically marked in the

order of the original disc.

Recorded

sound

level

Adjusted

auto-

matically.

You can also

adjust it

manually.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 79 80

Commentaires sur ces manuels

Pas de commentaire